The Momentus Mind Camera is a breakthrough device capable of capturing vivid memories and storing them directly in your brain. The incredibly satisfying and effective clicking noise triggers a Pavlovian response that your brain will come to associate with important memories. Made possible by navigating a narrow labyrinth of legal loopholes, you can now 3D print your own! So get out there and make some memories (at your own risk)!

This is the Basic Kit, which includes everything you need to make a functioning mind camera. For additional customization, check out the Pro Kit here.

Printing Guidelines

Watch the attached assembly video for detailed printing and assembly instructions!

• 0.4mm nozzle, 0.16mm layer height, 3 walls, 10% infill, 5 top and bottom layers.

• All parts were designed to work with PLA, and should hold up for hundreds of snaps but a more resiliant material like PETG or ABS may increase shutter life. I would avoid softer PLA variants like silk/matte, especially for the Trigger. As always keep PLA parts out of hot environments.

• Front_loose.stl part is included to compensate for imperfect prints, but it's highly suggested to use a tuned printer that works with the default parts for best operation.

• Designed to work with my printable Keychain Loop or any standard keychain.

• No adhesives should be necessary, but if you want to glue parts together for extra strength, I suggest E6000.