sample shapes textile
I've had quite a few requests for a textile for reference with how different filaments look with different shapes / bottom layer patterns. Here is an updated sample textile that I like to use particularly with dual and tri color filaments, since the travel direction of the hotend will dictate which primary color will show through, as shown in the photos.
This model is .72mm tall, or 3 layers at .24mm layer height. If you are printing on a thicker mesh, increase your layer height to greater than your fabric thickness.
For these samples, I like using illusion mesh as the minimal stretch decreases the chance of snagging if not properly tensioned.
If you'd like to mess around with the bottom layer patterns, I've included screenshots for bambulab/orca slicer for reference. Other slicers may be different.
sample shapes textile
256x256 PFLAT sheet holder
Massage Roller
Spinning gear fidget ring
Flat band fidget ring
Large TPU foldover bag
Adjustable Strap (48"/122cm max length)
Small Foldover Bag
Customizable Passport Wallet
Tall TPU Bifold Wallet for sewing
Vertical Wallet for Chicago Screws
Square Grid Negative Modifier
Hex Grid Fabric Modifier
Heart Pixel Pattern Textile and Modifiers
Vertical TPU wallet with rivets and grommets
Flippy heart textile and modifiers
Foldable TPU bag sized for Snapmaker U1
Crossed Basket Weave Textile / Modifier
Thin Beaded Textile / Modifier
Magnetic closure textile clutch
Thank you for providing this. I have purchased some Tulle, and the magnet sizes recommended in your videos. I'm getting ready to give this a try. Hopefully, I can get the hang of it.
salve avrei una domanda , vorrei provare a fare questo tipo di stampa ma avrei bisogno di un consiglio, si può stampare direttamente su tessuto? che tessuto mi consiglieresti di usare come prima vola? e come posso fissare il tessuto al piatto in modo tale da non farlo spostare? io possiedo un kobra 3 combo, grazie se risponderai.