tracking pixel
Daniel B

Infinity Bracelet, Earrings, Choker

by
kaizen3dprints
Follow
Follow
Remix Model
kaizen3dprints
kaizen3dprints
|
Image 6 of 10
Infinity Bracelet, Earrings, Choker 3d model
kaizen3dprints
kaizen3dprints
|
Image 6 of 10
Infinity Bracelet, Earrings, Choker 3d model
2D
3D
Makes
Infinity Bracelet, Earrings, Choker 3d model
Infinity Bracelet, Earrings, Choker 3d model
Infinity Bracelet, Earrings, Choker 3d model
Infinity Bracelet, Earrings, Choker 3d model
Infinity Bracelet, Earrings, Choker 3d model
Infinity Bracelet, Earrings, Choker 3d model
Infinity Bracelet, Earrings, Choker 3d model
Infinity Bracelet, Earrings, Choker 3d model
Infinity Bracelet, Earrings, Choker 3d model
Infinity Bracelet, Earrings, Choker 3d model
This model is restricted by licensing terms. 

This is a simple to print on fabric bracelet. There is a bracelet, choker, and set of earrings included with this file.

Earrings - 7cm printed length (3 inches, 4 inches with ring and hook) Bracelet - 14cm printed length (5 1/2 inches) Choker - 23.5cm printed length (9 1/4 inches)

You can estimate around 1 - 1.5 inches of additional length for the 2 jump rings and a small lobster clasp needed to attach the ends together. Add additional lengths of chain for custom measurements

There is a 3MF file that has the print settings. There are also the individual STL files if you wish to try your own settings.

In these examples I am using an illusion mesh from www.dfwfabricmart.com Fabric sample packs and holographic PFLAT sheets can be found on my website at www.kaizen3dprints.com

I print these with a .24mm layer height, for a total of 10 layers. The pause command is placed at the beginning of layer 9. I print the first layer at 35mm/s and the following layers at no more than 75mm/s. If I'm using a thicker mesh fabric, I slow my speeds down further and increase the layer height.

If you have any questions, please email me at Kaizen3DPrints@gmail.com

Happy Printing!


24 Likes29 DownloadsOctober 28, 2024


24 Likes29 DownloadsOctober 28, 2024
This model is restricted by licensing terms.