This is a simple to print on fabric bracelet. There is a bracelet, choker, and set of earrings included with this file.
Earrings - 7cm printed length (3 inches, 4 inches with ring and hook) Bracelet - 14cm printed length (5 1/2 inches) Choker - 23.5cm printed length (9 1/4 inches)
You can estimate around 1 - 1.5 inches of additional length for the 2 jump rings and a small lobster clasp needed to attach the ends together. Add additional lengths of chain for custom measurements
There is a 3MF file that has the print settings. There are also the individual STL files if you wish to try your own settings.
In these examples I am using an illusion mesh from www.dfwfabricmart.com Fabric sample packs and holographic PFLAT sheets can be found on my website at www.kaizen3dprints.com
I print these with a .24mm layer height, for a total of 10 layers. The pause command is placed at the beginning of layer 9. I print the first layer at 35mm/s and the following layers at no more than 75mm/s. If I'm using a thicker mesh fabric, I slow my speeds down further and increase the layer height.
If you have any questions, please email me at Kaizen3DPrints@gmail.com
Happy Printing!