I had an extra BTT Klipper Pi laying around that I opted to use for my V-Core 4 build. The mounting that they provide with the printed parts doesn't match the hole layout for the BTT Pi, so I mixed up my own.

Printing: I just used my Voron parts preset, 0.2mm layer height with 4 walls and 40% infill. Almost certainly overkill for this. I do recommend using PETG or ABA/ASA for this vs PLA, just to avoid any potential issues with creep. I used ABS since I had it on hand.

You will need: 4x M2.5 heat set inserts - you should have them or spares with the V-Core kit 4xM3 Heat set inserts - you should have them or spares with the V-Core kit

License - shared under RatRig's original license, Creative Commons.