tracking pixel
A

Mk23 Airsoft Suppressor 16mm+

by
antiman167
Follow
Follow
Remix Model
Mk23 Airsoft Suppressor 16mm+ 3d model
Mk23 Airsoft Suppressor 16mm+ 3d model
2D
3D
Makes
Be the first to upload a Make
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2885176.

This fake suppressor/ silencer was designed for the KWA Mk23 but it should fit other guns with a 16mm+ (CW) thread aswell. It's about 18.5cm long and has a diameter of around 3.4~3.5cm.

Disclaimer: I am not giving exact numbers as i had to upscale my print to around 104%. If you've a good printer that's well set up and calibrated you may not have to do so. I still advise to do a test print of the outer shell in which you just stop and test fit when the print reaches a height of around 1 cm.

Assembly: You need 1 outer shell, one endcap and 7 baffles. Put the baffles inside the tube of the outer shell with the narrow side facing the threaded part of the outer shell (As seen on the 2nd photo). Use a stick or a long screwdriver to align the baffles for a straight fit. To finish it get a hot glue gun and simply glue the endcap to the outer shell.


1 Likes36 DownloadsOctober 20, 2021


1 Likes36 DownloadsOctober 20, 2021
This model is restricted by licensing terms.