tracking pixel
Zer0s

TP-link BE800 series raised stand

by
Zer0s
Follow
Follow
Remix Model
Zer0s
Zer0s
|
Image 3 of 3
TP-link BE800 series raised stand 3d model
Zer0s
Zer0s
|
Image 3 of 3
TP-link BE800 series raised stand 3d model
2D
3D
Makes
TP-link BE800 series raised stand 3d model
TP-link BE800 series raised stand 3d model
TP-link BE800 series raised stand 3d model
This model is restricted by licensing terms. 

Raises the router by 20mm. It reduces temperature a tiny bit for my use case, I'm using it on BE805, I think it should work for TP Link BE800 series devices with a similar form factor.

Print the same model twice, put one in front and one at the back of the device.

I used some EPDM foam at the base so that it is less likely to move during accidental nudges.


Want to buy me a coffee? https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link: EPDM Self-adhesive Tape https://s.click.aliexpress.com/e/_DERY8dd


Consolidated affiliate links of other 3D printing-related items: https://wp.me/peMLu6-j

For Amazon affiliate links https://wp.me/peMLu6-2C


0 Likes1 DownloadsJune 14, 2024



0 Likes1 DownloadsJune 14, 2024
This model is restricted by licensing terms.