Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5806054.

***DO NOT PRINT IN PLA!! This will warp and lose grip of your AP, ask me how I know, must use PETG, ABS, or equivalent. PLA+ does not work either I tried it. I am testing resin now and will update.

TP Link Omada EAP 6 Series (660,670,650,610) Wireless Access Point Mount Plate. This is a simple model to allow mounting of a TP Link access point if you either lost or dont have the original wall/ceiling plate for your EAP. I lost one of my ceiling mount plates and needed something fast so I drew this bad boy up. The one I am using I printed with 10% infill at .2mm quality with lightning infill via cura 5.2.1. I would avoid using a brim if you can as it will adhere quite well most likely as my first couple of prints did. Also keep in mind the accuracy of your printer the official plate is around 115mm across and this print is 116mm but I found with my Voxelab Aquila S2 this offered the right level of accuracy for a nice fit. I have found my Aquila to be +/- .25mm depending on the size of the print. Thank you all for downloading and I hope this helps someone.

TP Link Omada EAP 6 Series (660,670,650,610) Wireless Access Point Mount Plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5777881.

Hi everyone! This is my first published model and it is a V1. My wife wanted something to hold her cups and tumblers while applying vinyl or etching. There are some commercial options but they are expensive and then the other 3D models I found were asking for payment and are either equivalent or worse than what I have made. This was done in TinkerCAD and is originally designed and printed for PLA, I would recommend printing this in TPU if possible as it will add some grip to the cup. I will be attempting to print this in TPU and currently have it going in PLA and will post pictures upon completion. I am not in this for money but if you want to leave a comment saying you made this or want to show a “make” or remix by all means please do I would love to see what people can do. Thanks for your time and hopefully your download!

Cricut Vinyl Cup Holder Cup Cradle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5968368.

This is a simple tower to stick the Haakaa breast pump on after use to allow it to drip dry.

Haakaa Drying Stand V2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5968427.

This is a remix of a great holder from Printables, I want to ensure the original maker is noted here:

https://www.printables.com/model/298341-haakaa-pump-baseholder/remixes

As for this remix:
This is a remix of the main Haakaa holder which was excellent, this just widens the base a tad. As the original maker has stated it is best to print this at a high infill, I used lightning as 64% and it came out very sturdy. I also opted to keep the resolution at .2 but you can definitely increase this for a rougher faster print.

Haakaa Holder Larger Base

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

sam.schultz2014

Achievements

Seedling

Explorer

TP Link Omada EAP 6 Series (660,670,650,610) Wireless Access Point Mount Plate

Cricut Vinyl Cup Holder Cup Cradle

Haakaa Drying Stand V2

Haakaa Holder Larger Base