Studio Loup

Select a membership plan

Monthly billing

Model is included in this plan
Available now

20% off

Hobbyist Membership

Hobbyist Membership

$8.00

/ month

when billed annually

Your entry point to Studio Loup’s growing library. Perfect for hobbyists who want clean, modern designs to print at home.

Hobbyist Member Benefits:

Download up to 5 models per month
Access the full Studio Loup library (240+ models) + all new releases
Personal use license only

20% discount when you choose an annual plan

Immediate access. Cancel anytime.The models in this plan are restricted by licensing terms. View License.

Model is included in this plan
Available now

20% off

Commercial Membership

Commercial Membership

$12.00

/ month

when billed annually

Unlimited access for those who want to sell their prints or explore the full Studio Loup catalog without restrictions.

Commercial Member benefits

Commercial license to sell physical 3D prints on Etsy, markets, or your own shop
Unlimited downloads from the entire Studio Loup design library of 240+ models
Option to use Studio Loup imagery in your product listings
Priority support

20% discount when you choose an annual plan

Immediate access. Cancel anytime.The models in this plan are restricted by licensing terms. View License.

Studio Loup9.7K followers

Follow

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case

948 downloads · 1 year ago · **Slide Pen Case** Pen case with a sliding lid that locks securely when closed. Includes three inter

This model is restricted by licensing terms.

View license.

Slide Pen Case Pen case with a sliding lid that locks securely when closed. Includes three interchangeable inserts to suit different storage needs.

Print Settings All components print without support 15% infill 0.2 Layer Height (Lowering the layer height may increase the surface quality)

Tags:

Community Makes (3)

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

These print great. It would be nice if they were stackable.

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

These print great. It would be nice if they were stackable.

Community Makes (3)

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

These print great. It would be nice if they were stackable.

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

These print great. It would be nice if they were stackable.

Discussions

isuzudave11 months ago

These print great. It would be nice if they were stackable.

These print great. It would be nice if they were stackable. 3d model

PrinterBambu Lab P1S

MaterialPLA

Layer height0.2 mm

Infill density15 %

SupportsNone

raptor_48 months ago

What speed did you print these? The ridges on my two attempts look horrible. Yours look pretty good.

raptor_48 months ago

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed? 3d model

MaterialPLA

Layer height0.16 mm

Infill density15 %

SupportsNone

BrimNo

srubaye9 months ago

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

srubaye9 months ago

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

It is small for Staedtler pencils. When I scaled it to 115% it has a defect
3d model

PrinterBambu Lab P1S

isuzudave11 months ago

Any chance of getting a modified lid to make these stackable?

Studio Loup11 months ago

Hi, thanks for the feedback! Yep I could make a modified version that can be stacked. I'll work on it this week.

Slide Pen Case

948 downloads · 1 year ago in

Storage Solutions

and

Studio Loup9.7K followers

Follow

This model is restricted by licensing terms.

View license.

More models