Sanding Block

You need

2x M8-35mm Screws

2x M8 nut

Hot glue (Optional)

General Information

I printed the parts in PLA, the base should be printed in PETG/ABS because it can endure more heat. The 3d Model was drawn in FreeCAD and I used the PrusaSlicer to slice the parts. I used hot glue to close the holes in the surface and to keep the screws in place.

You are free to Remix my 3D Model but don't forget to post it so other users can benefit from the changes you have made.

Thanks for Downloading!