MODEL DESCRIPTION

✨🌈Colorful Rainbow for kids designed as an activity. The idea is for the kid to match the color of the arc with the correct stick 🌈✨.

With this activity, we are searching to show the little ones precision when working with small pieces. The color assignation should be something straightforward at small age but the aim of this activity is to work on precision and focus if the activity is a challenge!♥️♥️♥️

🚨THIS ACTIVTY NEEDS TO BE SUPERVISED FOR SAFETY SINCE IT COINTAINS SMALL PIECES!🚨

📥Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/ 📥

PD: in the pictures you will see that the sticks are a cylinder. This was changed to an hexagonal shape in order to increase the strength of the piece! Like this the can be printed horizontally boosting significantly the resistance to hard hits.

PRINTING SETTINGS

Recommended settings:

NO SUPPORTS NEEDED FOR ANY PART!

MODEL IS SCALABLE if you have a big printer but it is not needed as the activity can fit "working trays".

Adhesion: Nothing is needed.

Layer height: 0,2 mm is more than enough

Infill: 10 - 15 %. Consider more if you need the sticks to be more resistant

Post -Process: You will need to assemble the base with the different Arcs using the joiners and some glue. This should not be a problem and it is super straightforward. You will see that the joiners can only be used for one of the arcs so it is impossible to get confused with the pieces!