An amazing print that will help you organize if you have more build plates than printers (like my case). It will case up to 6 build plates (256x256 mm). A must have if you possess ANY of the Bambulab printers!
This print can act as:
A Tripod: Specially useful if you have an A1 printer and space to flex on your build plates
A Side mount: If you have a P1S or any of the X1 series AND an AMS system. The AMS is necessary to side mount it since the weight of it will fix the plateholder (as counterweight).
This build does not use ANY GLUE (i did not use even one drop on mine) but could be a good addition if needed. Layer lines and how it is assembled will ensure that the final product does not snap!
USE THE PICTURES AS INSTRUCTIONS (it is super clear and easy) you can't miss it!
Any question regarding the model or how to assemble it can be sent to my Instagram DM: https://www.instagram.com/printplay.3d/
Buying this model does not grant access to sell it commercially, just for PERSONAL USE!
YOU FILL FIND THIS MODEL ON MY COMMERCIAL LICENCE MEMBERSHIP. ONLY WHEN THIS MEMBERSHIP IS ACTIVE YOU WILL BE ABLE TO SELL THIS MODEL YOURSELF
3D printing settings -You will find STLs for all the pieces separately and the 5 together in case you want to to multicolor in a single color printer ;)
-MODEL IS NOT SCALABLE: Everything has been measured to a perfect fit!
-Layer height: here you have different options, all of them could be used: -0.2 mm for a "not so detailed" final print. Use this only as final resource.
- 0.08 mm for a super detailed final print. This is the one I usually chose. -You could also use the adaptative layer height on BambuStudio to combine the best of both worlds
Supports ARE needed for one piece only. Normal and Automatic Bambulab supports works wonders then removing (when pliers are used) highly recommended
Adhesion: Nothing please, the use of brims will mess the perfect fit!
Infill: 15% is necessary on this one to ensure strength.