WELCOME TO HALLOWEEN DECORATION PART 3!
Since Halloween is SUPER near I have prepared a series of models in order to have an amazing PINTING OCTOBER!
To start continue with the series I have the honor to present the SCARY SKULL BONE MASK!
I have prepared this amazing high detailed mask to enhance the looks on your Halloween parties or when going door to door for the trick or treat!
The fitment is on top but still scalable in order to make it bigger or smaller! Also the mask is designed to be able to have small foam parts on the inside in order to adjust it to your face if you do not want to have it super close to the face when wearing it for a long time! It also has some holes on both sides in order to add a cord or some Velcro to fix it super easy to the head.
My personal recommendation is to wear it with a dark "Balaclava" underneath that covers your face in order to have the best look possible.
I used polymaker_3d filaments as always for that amazing final result! I used the Glow in the dark green for the bone part, Charcoal Black for the black parts and Gold for the Tusks to give a bit of detail.
With the model you will also have available as a SURPRISE:
-Longer horns that are my absolutely favorite -Broken horns. In order to add a broken horn for the side that you prefer if you want to opt for that look. -Broken Tusks in order to go with the broken horn look if you want
Do not hesitate to drop a follow because A LOT MORE MODELS ARE COMING SOON!!
If you want to see this design in action Click the link ▶️:
Drop a like💜, comment 💬 it really helps us creators to get more done :D
Buying this model does not grant access to sell it commercially, just for PERSONAL USE!
Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/
Let's see how this amazing mask does for the contest with ELEGOO :) #ThangsLovesELEGOO
3D printing settings All the files are scaled for a "standard adult head" but in case you need to scale there is still space on the buildplate to make it a big bigger.
Layer height: -0.2 mm is perfect. You could go for lower layers for extreme detail or use the Adaptative layers from bambulab to have best of both worlds
-SUPPORTS ARE NEEDED. They are already ready for all files but you can check and optimize as I used the Standard Tree support (that, in my opinion, work amazingly good)
-Adhesion is needed to print the teeth but, as the support, is already coded in the STLs
-Infill: between 5 - 10% is more than enough. I printed mine with 5%