PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

---

DESIGN DESCRIPTION 🎲

I’m super excited about this design, which is entirely a Nick Design! Even though he won’t take credit for anything, Nick has been such a big part of my 3D printing journey—teaching me how to print, helping me learn to design, and keeping everything running smoothly behind the scenes.

Lately, Nick has had a bit more time to create and we're thrilled to share his newest design: the D20 Dice! 🎲 It’s the start of what we hope will become a fun, customizable series. We've even included a rounded cap which can be used to turn this into a 20-clicker ball and some fun extra symbols for 1 and 20 alternatives! This one does require some assembly, with separate base and connector pieces so make sure to read the datasheet carefully - but no glue should be required! We originally planned to wait until we had assembly videos ready, but Nick’s been so excited to share it so we decided to go ahead now. Written instructions included in download and videos coming soon!

We hope you have a blast with this one - I know we've been loving it! 🎲2️0️🎲

This pack contains 1 unique base designs and 30 cap designs. There is no keychain option for this design. You need 20 bases, 12 hubs, 20 clickers and 20 caps to complete this design. There are two types of Hubs, one that is tapered and one that is not. The tapered one may be easier to install but the non-tapered one might hold better. There are also two types of bases to account for printer tolerances. If your printer is good at handling tight tolerances, use the Tight base. If your printer cannot handle tight tolerances, the standard version is for you. Note that some filaments may over/under extrude which could impact assembly.

---

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

---

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

---

PHOTO COLORS🎨

• Black - Prusa Galaxy Black
• Silk Green - Overture Silk Neon Green
• Silk Bronze - Overture Silk Copper PLA
• Dark Blue - FlashForge Burnt Titanium
• Pink - Cookiecad Pale Pink Elixir
• Silk White - Amoybaby Silk White PLA

---

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter: 0.33mm (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended)

Note: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

• Small Detail (Numbers/Symbols)
• Everything Else (Base Colors)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

---

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com