Sunset Camaro Magnet

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments Used: PLA Polyterra Black PLA HP3D Red PLA HP3D PLA Bambu Jade White

3D printing settings

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Swap Instructions: Start with Black At layer #16 (0.84mm) swap to Red At layer #30 (1.4mm) swap to Yellow At layer #52 (2.28mm) swap to White for the rest.