This picture was hand drawn and printed using HueForge. The HueForge snaps into the printable Frame included. Recommended to print the Frame at 100% infill. If you have any questions or need support, feel free to reach out on my new community Discord!

Stl and 3mf file included for both the Frame and the Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Polychroma T Grey Transmission Distance: 7.1 PLA+ Esun Brown Transmission Distance: 0.8 PLA Chrominal Chestnut Brown Transmission Distance: 3.8 PLA Polyterra Dark Grey Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5.7 PLA BambuLab Basic Blue Gray Transmission Distance: 2.6 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA PolyLite Polymaker Teal Transmission Distance: 1.2 PLA Creality Hyper Blue Transmission Distance: 1.2 This print uses 10 unique filaments

Swap Instructions: Start with Black At layer #39 (1.68mm) swap to Grey At layer #43 (1.84mm) swap to Brown At layer #48 (2.04mm) swap to Chestnut Brown At layer #50 (2.12mm) swap to Dark Grey At layer #53 (2.24mm) swap to Jade White At layer #59 (2.48mm) swap to Blue Gray At layer #67 (2.8mm) swap to Army Blue At layer #74 (3.08mm) swap to Polymaker Teal At layer #77 (3.2mm) swap to Blue for the rest.

If you like what I do feel free to follow and check out my social media pages to stay up to date with whats coming next!

https://linktr.ee/neokoiprints