This model is restricted by licensing terms.
View license.
5 Likes75 DownloadsJanuary 13, 2022
This model is restricted by licensing terms.
View license.
The two Split Side Panel parts are optional.
Please visit the blog post for comprehensive 3D printing and assembly instructions.
Recommended slicer settings:
- Nozzle Size: 0.4mm
- Wall/Line Width: 0.4mm
- Perimeter/Wall Count: 4
- Layer Height: 0.2mm
- Top Layers: 6
- Bottom Layers: 6
- Infill Density: 40%
- Brim: Yes
- Supports: No (with the exception of radiator clamp, which requires supports)
Tools and hardware required:
- 3D printer, or access to 3D printing service
- 3D printing filament (ABS or PETG Recommended)
- Ball-end hex driver for blind screws
- Soldering iron with B2 (Conical) tip
- Flush cutters
- M4x12mm SHCS (5 Units)
- M3x10mm SHCS (5 Units)
- M3x10mm BHCS (6 Units)
- M3x8mm FHCS (2 Units)
- M4 heat set inserts (5 Units)
- M3 heat set inserts (13 Units)
Category:
5 Likes75 DownloadsJanuary 13, 2022
This model is restricted by licensing terms.
View license.
5 Likes75 DownloadsJanuary 13, 2022
This model is restricted by licensing terms.
View license.