I have one last Valentines design to give you all - THIS WAS NOT PLANNED! This is a Bonus MOD that was suggested by a supporter, and I took a few hours create it and see how I liked it. - Well, it's actually cute, so I have decided to release it to you all. I know it's really late for shops printing Valentine's Day designs, but again, please understand this is a Bonus and was not planned.

This is a simple Valentine's MOD for the original Tiny T-Rex design! Hope you all enjoy this! :)

As most Cinderwing3D "Tiny" Designs, the original size is usually pretty big. The "TINY" come in where they have been designed with bigger links to be SRONGER and capable of printing at smaller, ACTUAL TINY sizes.

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Membership and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

For commercial license and monthly bonus models, click here!

Filaments I use! Not an exhaustive list but if I remember, it'll be here! Amazon Affiliate links!

---

3D PRINTING SETTINGS

FDM Settings 3 walls 10-25% infill No supports Raft or brim if you have adhesion issues. Models tested between 60-100% generally

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.