Robin H

Power tool holder, Wire shelving click-on

by
Mojs
Follow
Follow
Remix Model
Mojs
Mojs
|
Image 2 of 7
Power tool holder, Wire shelving click-on 3d model
Mojs
Mojs
|
Image 2 of 7
Power tool holder, Wire shelving click-on 3d model
2D
3D
Makes
Power tool holder, Wire shelving click-on 3d model
Power tool holder, Wire shelving click-on 3d model
Power tool holder, Wire shelving click-on 3d model
Power tool holder, Wire shelving click-on 3d model
Power tool holder, Wire shelving click-on 3d model
Power tool holder, Wire shelving click-on 3d model
Power tool holder, Wire shelving click-on 3d model
This model is restricted by licensing terms. 

Various sizes of power tool holders that clicks directly into common Wire shelving (no additional fasteners needed).

They are all designed to fit wire shelving that consist of 3mm diameter "wires" that is spaced 25mm apart (this seems to be a common size of wire shelving even in US).

There are 4 versions with these inside sizes (mm)

  • Width:70 Height:65 Depth:150
  • Width:83 Height:78 Depth:150
  • Width:70 Height:65 Depth:245
  • Width:83 Height:78 Depth:245

Should be printed in the alignment they are saved in the .STL files. But you need to add support for the portion that grabs onto the wire shelving. I recommend normal (SNUG) support for those areas only (see picture). The rest of the holder prints fine with no support, but your printer need to be able to bridge fairly large (50mm) gaps, as far as I know all modern printers do.

Inspired by Universal cordless Drill Holder by kerngebiet .

UPDATE Added tapered versions (wider front narrower back), discovered that it fits more tools this way, and make a snugger fit overall.


10 Likes47 DownloadsOctober 28, 2024



10 Likes47 DownloadsOctober 28, 2024
This model is restricted by licensing terms. 

Instructions

Filament

Infill density15 %
SupportsGrid
Support styleGrid - Snug