Power tool hangers, Fits under the shelf in Husky cabinets, easy to insert and remove, no fasteners needed. 

The exact Husky cabinet I have where I designed this to fit is: 
[Welded 24-Gauge Steel Wall Mounted Garage Cabinet in Black (24 in. W x 18 in. H x 12 in. D)](https://www.homedepot.com/p/Husky-Regular-Duty-Welded-24-Gauge-Steel-Wall-Mounted-Garage-Cabinet-in-Black-24-in-W-x-18-in-H-x-12-in-D-G2402W-US/312050628
)

The models are stored in the direction I printed them. You need to enable support from build plate only (the internals need to support). I recommend normal support for this part. 

This is a remix of my earlier model:
[Power tool holder, Wire shelving click-on](https://thangs.com/mythangs/file/1163855)

There are 3 versions with these inside sizes (mm)

-   Width:70 Height:65 Depth:150
-  Width:83 Height:78 Depth:150
- Width:90 Height:90 Depth:160 (fits my large 1/2 inch impact driver)



PowerToolHanger_HuskyCabinetInsert

PowerToolHanger_HuskyCabinetInsert_X70_Y65_Z150.stl

Various sizes of power tool holders that clicks directly into common Wire shelving (no additional fasteners needed). 

They are all designed to fit wire shelving that consist of 3mm diameter "wires" that is spaced 25mm apart (this seems to be a common size of wire shelving even in US). 

There are 4 versions with these inside sizes (mm)
- Width:70 Height:65 Depth:150
- Width:83 Height:78 Depth:150
- Width:70 Height:65 Depth:245
- Width:83 Height:78 Depth:245 

Should be printed in the alignment they are saved in the .STL files. But you need to add support for the portion that grabs onto the wire shelving. I recommend normal (SNUG) support for those areas only (see picture). The rest of the holder prints fine with no support, but your printer need to be able to bridge fairly large (50mm) gaps, as far as I know all modern printers do. 

Inspired by [Universal cordless Drill Holder]( https://www.printables.com/model/437327-universal-cordless-drill-holdermount-makita-dewalt/files) by  kerngebiet .

UPDATE
Added tapered versions (wider front narrower back), discovered that it fits more tools this way, and make a snugger fit overall. 

Power tool holder, Wire shelving click-on

PowerToolHanger_WireShelvingClickOn_X70_Y65_Z150.stl

PowerToolHanger_WireShelvingClickOn_X83_Y78_Z245.stl

PowerToolHanger_Tapered_WireShelvingClickOn_X70_Y65_Z150.stl

PowerToolHanger_Tapered_WireShelvingClickOn_X83_Y78_Z150.stl

Designed and printed them to secure things in my yard for recent hurricane. I used a big screw driver trough the top whole to get leverage and screw it down. 

They need to be printed sturdy, so make sure the walls are at least 3mm thick and use high infill%. 

I printed them using 0.8mm nozzle and 0.4mm layer height in PETG and 4 wall loops (that makes the walls almost 4mm thick). If using a smaller nozzle and strength is important increase the amount of wall loops. For me print time was a little over 2h. Note that you want to print them lying down so you get the strength of the layer lines along the length of the anchor, this means that some support is required. 


Dirt Anchor

AnchorV2.step

Enjoy a winged devil on a skull. 

This is by far the most involved 3d printable model I have done to date. 
After the initial model was in place, it took over 20 printing attempts and a lot of model redesigns before I could reliably make it print in a SILK filament. In the end I was able to  keep the wings spread out. 

On my printer setup (Ender 3 V3 SE) and using SILK filament I could not get it to work with just the slicers Tree or Normal support, but had to also manually add support into the model, it is however easy to remove. 

Attached pictures shows directly out of printer with the manual supports. 

Attached are 3 versions

**No supports** please use slicers normal or tree support with 15% support threshold angle and it should work with normal PLA . 
**Medium supports** please ALSO use slicers tree support with 15% support threshold angle. 
**Heavy supports** please ALSO use slicers tree support with 15% support threshold angle.  This prints reliably with SILK-PLA for me. 



Winged devil on skull

winged_devil_on_skull.3mf

Jumpy Biter

Print with tree support from build plate only. Recommend 3 wall loops.

3mf file included with printer settings used.

Jumpy Biter

ArmlessBiter.3mf

Angry M. 

Print with normal support from build plate only. Recommend 3 wall loops. 

3mf file included with printer settings used. 

Angry M

HandyPacMan.3mf

Robo Ball Man. 

Print with grid (snug) support, 20 angle, from build plate only. Super easy to remove. 

Recommend 3 wall layers so no infill shows trough, use low % infill (10% or so). 

Robo Ball Man

RoboPacMan.3mf

A Halloween pumpkin for thanks giving. 

Supports needed, recommend tree support from build plate only. 



Halloween Pumpkin 2

HalloweenPumpkin2.3mf

Sheets Ghost Halloween. 

No supports needed! 

Sheets Ghost Halloween

ghost.stl

A Halloween pumpkin.

Recommend printing with Grid-Snug support for easy removal for the upper jaw, this support is pre configured in .3mf file. 




Festy halloween pumpkin

HaloweenPunkin.3mf

Demon rubber duck.

Needs some support, recommended to use TREE support with 20 threshold angle. 


demon rubber duck

deamon_rubber_duck_simple.stl

Printable rubber (TPU) boot for Harbor Freight 6ton jack stands. Likley fits many other jack stands with same top end as well. 

Settings I was happy with was 3 wall loops, 50% cubic infill and Tree support. 

6ton HF Jack Stand Rubber Boot

FloorJackRubber.stl

Full access and unlimited downloads from rapidly growing catalog.
For non commercial use. 

You can sell your prints, but not the digital files (The 3MF / STL).

Printer Pioneer

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Mojs

Achievements

Seedling

Voyager

Debutant

Pinned models

Halloween Pumpkin 2

Angry M

Jumpy Biter

Winged devil on skull

PowerToolHanger_HuskyCabinetInsert

Power tool holder, Wire shelving click-on

Dirt Anchor

Winged devil on skull

Jumpy Biter

Angry M

Robo Ball Man

Halloween Pumpkin 2

Sheets Ghost Halloween

Festy halloween pumpkin

demon rubber duck

6ton HF Jack Stand Rubber Boot