🚀 About the Model This is a faithful replica of the Saturn V, it's a static model: 100% of the parts are printed, you only need your filament and glue.

• Structure: Sections fit together using alignment connectors to ensure straight gluing.
• Details: Spacecraft,Service module, USA Letters, and F1 engines.

📊 Tech Specs

• 📍Scale: 1:200
• 📏 Dimensions: 56 cm (Height) x 5 cm (Diameter)
• ⏱️ Print Time: ~11 hours

🧱 Difficulty:

• 🖨️ Printing: 3/5 (Brim on small parts)
• 🛠️ Assembly: 2/5 (Gluing and alignment)

🎨 Filament:

• ⚖️ Total Weight: 190g
• ⚪ White: 185g
• ⚫ Black: 75g
• 🔘 Silver / Grey: 30g
• 🔴 Red: 5g

⚙️ Print Settings

• Material: PLA recommended.
• Infill: 10% (Gyroid pattern advised).
• Walls: 2 walls minimum.

📂 Files Included

• Saturn V By Color : Parts are sorted by color for easier printing.
• STL Folder: Files are sorted by block.

⚠️ Critical Preparation

• Before starting the print, follow these 2 steps to ensure success:
• 🧼 Cleaning:Wash your printing tray, as a greasy tray will cause deformation and parts to come detach!
• 📏 Calibration: Calibrate your your printer

💡 Assembly Tips

• Connector Adjustment (VERY IMPORTANT): Every printer has different tolerances. If connectors are too tight: Re-print them by reducing X/Y scale to 98% or 99% in your slicer.
• If connectors are too loose: Increase X/Y scale to 101% or 102%.
• Gluing: Use liquid or gel Superglue

💖 Support the Project (It's Free!) This model represents dozens of hours of design and testing. Here is how you can support my work:

• 📸 Post a Make: Upload a photo of your print.
• ⭐ Rate & Like: A rating and a "Like" really help with visibility.