3D printable models for teachers, classrooms, and learning, including skeletons, anatomy, astronomy, math, geography, geology, chemistry, psychics, and more.

3D Printed Models for Education and Science

Digital Sundial

Gnomon_Northen.stl

Perseverance.obj

Starship

SH_Raptor_Black_x1.stl

Mars Lithopanes

This is a Mars Lithopane for you to remix. It's based on actual NASA imagery.
If you need a different size check my page out I also have diameters 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 225, mm and 250 mm on there.
It's designed for an FDM printer with a 0.4 mm nozzle. You may be able to print this with bigger nozzles, if you use the layer height and width i recommend.
Print settings:
Domes are quite hard to print. I never printed this as a whole, I always cut it into pieces first.
Layer Height 0.2 mm
Layer Width 0.4 mm
No supports.
I always decrease the speed at the top of the dome (when the bridging occurs) to 50%. You can do this in Cura using the extension post-processing.
I use standard white PLA for these. If you are unsure if your filament works, just shine through the walls of the print with your phone lamp at something like 10% print completion. You should see the Lithophane effect.

Remember to add me when you remix this, I'm eager to see what you do with this. I made some ready to print lamps with this, you can check them out at my site.

If you used this, please consider buying me a coffee at https://www.buymeacoffee.com/Ri0m0
I'm a poor student in need of filament.

Ariane 6 Kit Card

ariane6 v6.stl

Big Glowing Moon // Glow Filament Decals

BigMoon_137_Glow.stl

Jupiter Ceiling Lamp

Jupiter 200mm incorrect.stl

Jupiter Night Light

space_shuttle_launch.stl

Dodecahedron Planetarium // Folding Polyhedra

planetarium-full.stl

Lunar Beacon Command

Lunar Beacon Command.stl

Hybrid Hanging/Desk Mercury Lamp

p2v neptune.stl

Perseverance GLTF

Mars 2020 Perseverance rover 

https://mars.nasa.gov/resources/25042/mars-perseverance-rover-3d-model/

Hybrid Hanging/Desk Sun Lamp

Lunar Catch Crater (catch tray?)

C1 Lunar scape.stl

Skywatcher Heritage 150P Lightshroud

Print in black fillament, suggest a 0.4mm layer height. To print in one piece you need quite a tall printer (like the sidewinder X2) but it could possibly be split and printed in two parts then glued together.

This fits inside the tube of the telescope, can be attached with some cable-ties (or drill some hole sin the spider holder and use screws). Slides in when the scope is collapsed and blocks stray light when it's in use.

3D Printed Models for Education and ScienceAstronomy

3D printable models for teachers, classrooms, and learning, including skeletons, anatomy, astronomy, math, geography, geology, chemistry, psychics, and more.

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Digital Sundial

Perseverance.obj

Starship

Mars Lithopanes

Ariane 6 Kit Card

Big Glowing Moon // Glow Filament Decals

Jupiter Ceiling Lamp

Jupiter Night Light

space_shuttle_launch.stl

Dodecahedron Planetarium // Folding Polyhedra

Lunar Beacon Command

Hybrid Hanging/Desk Mercury Lamp

p2v neptune.stl

Perseverance GLTF

Hybrid Hanging/Desk Sun Lamp

Lunar Catch Crater (catch tray?)

Skywatcher Heritage 150P Lightshroud

ISS Realistic.obj

Artemis Space Craft REMIX

Sagittarius Turtle