| Visit JERRARI3D.com for Instructions and a complete look at the GEN2 collection

The GEN2 Series is the next evolution in the most versatile 3D printed drawer system, the GEN2 Modular Storage System. You can now easily swap drawers around thanks to the fully 3d printable QuickLock mechanism design.

STEP 1: Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at JERRARI3D/gen2-modular-system

• UNDER TABLE (GEN2 RAILS) Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds. • TABLE TOP KITS Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere

These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length.

HARDWARE Includes affiliated links to help support my projects • Filament - Black PETG (My go to for the drawer bodies) • Screwdriver • Magnets (Optional): 10x5x2mm or 10x2mm • M3 nuts and screws: M3x6 - M3x10- I prefer this kit • Label Maker (makes 12mm labels) - I prefer this one

• (*Optional - Under table) Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long) • (*Optional - Under table) Drill bit that is smaller diameter than the wood screws • (*Optional - Under table) Pen, Marker, or Scratch Awl (for installing under tables)

INSTRUCTIONS

Detailed visual instructions at Jerrari3d.com

INSTRUCTIONS

See attached videos or visit for basic instructions JERRARI3D.com