Print-in-place No Support Needed Tested with the PS5 controller, Xbox One and Series X controller, and Nintendo Switch Pro Controller. (It surely works with more controllers, but you will have to find out.)
Here's the Cloud Controller Stand! Super easy to print in any color to go along with your TV or desk setup! Check out my other Cloud Design for a matching Gaming Setup.
The model was carefully designed to keep your controller safe from falling and should resist some gentle knocks.
To get the best out of the STL file, please follow these guidelines: • No support is needed. Everything is Print-in-Place. • Layer Height 0.2mm • Nozzle 0.4mm • Recommended infill 15%. • Recommended Infill Pattern: Gyroid or Cubic • 2 walls are okay. 3 will get you some extra strength.
• Prepare and clean your bed for excellent adhesion. • Please, choose a printing speed your printer can handle and provide the best quality outputs. • Make sure your bed is correctly leveled. Then check again. • Try to hide the seam and place it where nobody will pay attention (usually at the back). • Make sure your printing and bed temperatures are adequate for the filament you are about to use.