tracking pixel
Jeff H

Coffee Filter Caddy

by

Flaneur

Follow
Follow
Remix Model
Like
Flaneur
Flaneur
Image 1 of 3
Coffee Filter Caddy 3d model
2D
3D
Makes
Coffee Filter Caddy 3d model
Coffee Filter Caddy 3d model
Coffee Filter Caddy 3d model
This model is restricted by licensing terms. 
2 Likes6 DownloadsMarch 2, 2022
This model is restricted by licensing terms. 


Description Since I buy my filters in bulk, I needed a nice little box to leave some in on the kitchen counter.

Materials and methods STLs are sized for #4 Melita filters. You could scale the files for other filter sizes, but for the sake of keeping the hinges round and of a good size it is better to use the SCAD file to create new STL files for the proper size. The design is parameterized and the variables are documented. You will likely want to change the values for wd, dp, ht, and droop.

Printed at 100% infill in PLA. Walls are 1.6mm (as per thk parameter) so infill % doesn't matter much if your wall thickness is at least 0.8mm.

I prefer to print the parts separately since the base does not need any brim, but the lid benefits from a small brim to keep the hinge area from curling up.


2 Likes6 DownloadsMarch 2, 2022




This model is restricted by licensing terms. 
2 Likes6 DownloadsMarch 2, 2022
This model is restricted by licensing terms.