Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4433545.

Here are some simple stencils to print.
They have a simple hook on the sides to keep their distance.
I use them to mark the pitches on the campsite. there is also the P for parking.

Stencil numbers for Spray Paints - silhouette numbers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5311085.

I didn't have hot water and wanted to cook the soup in the microwave. I couldn't put the container with the aluminum lid so I created this lid in PLA.
Caution!! holds for 2 minutes but deforms afterwards.

Saikebon cap

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5296166.

Comfortable faucet aerator wrench for M24.
I also posted the freecad file if is of interest.

Faucet aerator wrench

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5176775.

I made this adapter because the original knobs of the geeetech a20 are too small and not very precise.
Attention! the knob behind the left must remain small due to collision with the Y stepper!

Leveling Knob Geeetech A20

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4244200.

Porta frese per cnc da applicare tramite vite alla struttura in alluminio.
Possibilità di inserire fino a 42 mini frese.
Dimensione 60x45x20 mm (h)

v2: upgrate porta frese sostituendo 10 fori per le frese con due fori grandi per i mandrini (piccolo da Ø 10 mm e grande da Ø 17 mm) + 3 piccoli fori (2 da Ø 1,5 mm e 1 da Ø 1 mm) che possono ospitare le chiavi a brugola.

Porta frese per cnc - cutter holder for cnc

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4291901.

Ricostruzione della maniglia della grattugia per spatzle attrezzo per realizzare i gnocchetti tirolesi. E' un attrezzo che per le sue caratteristiche non è facilmente reperibile e comunque il costo della realizzazione della maniglia è molto inferiore al prezzo di acquisto.



Maniglia grattugia spatzle o spätzlehobel (gnocchetti tirolesi) - grater handle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4308650.

This accessory is made with a cheaper and large brush.
Thank's Locks007. :)
gcode to integrate:

M117 PStart clean nozzle
G28; Home
G0 Z15; Avviare l'ugello del pennello
G0 X-16 Y130 F7500;
G0 Z8; --------------- Nozzle to brush ; attention! livel is personalized
G0 Y180 F7500;
G0 X-13;
G0 Y130 F7500;
G0 X-10;
G0 Y180 F7500;
G0 X-16 Y130 F7500;
G0 X-9 Y145.5 F7500;
G0 X-16 Y151 F7500;
G0 X-9 Y156.5 F7500;
G0 X-16 Y162 F7500;
G0 X-9 Y167.5 F7500;
G0 X-16 Y173 F7500;
G0 X-9 Y173 F7500;
G0 X-16 Y167.5 F7500;
G0 X-9 Y162 F7500;
G0 X-16 Y156.5 F7500;
G0 X-9 Y151 F7500;
G0 X-16 Y145.5 F7500;
G0 X-9 Y130 F7500;
M117 PEnd clean nozzle

G0 Z20; Up nozzle
M117 PPosizion center nozzle 
G0 X110 Y110 Z5 F7500; tornare al centro

; Go Print ---->

A8 Large Brush Holder 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5186295.

I broke the stop filter holder on my coffee machine.
I tried and it's perfect

Filter stop coffee machine De Longhi

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5081919.

my compliments to flying_chaos for his work https://www.thingiverse.com/thing:1759272.
the nuts were too big and I worked out the hook from M4

Tool holder adaptor M4

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5330118.

Small modification to reinforce the camera mounts

 GoPro Backpack Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4308291.

logo Harley Davidson  with rounded base.
A gift for a bikers! ;)

Emblem Logo Harley Davidson Cicle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4361760.

Insert a "step" on the outside of the hanger for not slide off the helmets.
I inserted a hook under the structure

Helmet Hook v3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4794324.

I had a problem with the interphone because the clip did not fit between the shell and the padding. I created this hook that can be put on the helmet with the double-sided adhesive.

interphone V6 rider hook

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

MarcoEve

Achievements

Seedling

Debutant