Hey everyone, here's another fruit themed HueForge for you to enjoy! I love how these print and look on the wall, this original is only available for a limited time, so get it while its free!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Brown Transmission Distance: 0.8 PLA PolyLite Yellow Transmission Distance: 11 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Brown At layer #11 (0.96mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.