RING | Fastprint Table Lamp
RING | Fastprint Table Lamp
Want to buy a physical 3D print of this product? Head to Trajann online store.
Fast-print, stylish & retro, light & strong. Those were the criteria I kept in mind when designing this RING table lamp (for E14 bulbe sockets).
The shade has a ringed profile that prints very fast, in barely over 2h in vase mode. This particular pattern nicely diffracts the light from the bulbe, the way flutted glass would.
I designed the stand with very sleek feet, to give the impression that the shade is almost floating. The feet are connected by a ring which secures the shade and makes for a sturdy print that should go without a hiccup.
More variations of the shade design coming soon.
This shade is also compatible with the tripod of the Draped Elegance table lamp. For those who already bought the Draped Elegance, I added this RING shade into the Draped Elegance table lamp so you can download it for free.
You can get the power cords from Amazon here: E14 cord: https://amzn.to/3TchBqs
Happy printing!
DIMENSIONS | Ø230 mm x H 330 mm
PRINTING | Shade ~2h | Tripod stand ~2.5h
Bulbe socket | E14
3D PRINTING SETTINGS
Print mode: Vase mode Resolution: 0.2mm / layer or less Build adhesion type: 6~8mm brim Supports: None
The shade must be printed in "vase mode", with bottom and top faces "open". We recommend to set up a brim of minimum 6mm at the base to make sure the shade stays in place during printing.
The tripod base must be printed upside-down, so with the feet pointing up, and the ring flat on the printing bed.
For the shade, it's preferable to use a strong filament, such as ABS or PETG rather than PLA. For the base, any material is fine (except TPU and other rubber-like filaments).