You will need, 2x M3x8mm hex screws and nuts and obviously a blade : https://amzn.eu/d/7WZzC8f

Print eveything upside down.
PLA should be fine but PETG etc recommended @ 0.2 layer height max.

Apply the tiniest drop of oil to the slide rail sides before use.

Safety Features include retractable function, also includes little built-in catch for reassuring deployment and retraction.

Camping / Unboxing Tool

BLADE_V2.3mf

Mount, Dual 5015 Fan Duct and basic cable management system.

Print each with their air output facing upward for easy support removal. Definitely have your cooling and support settings well tuned.

All in One BIQU H2 Mount

H2MOUNT_A.3mf

Indended for dimensions of 12V 30A 360W PSU:
https://amzn.eu/d/hipaTOP


PSU MOUNT.3mf

Dont use PLA if installing into an enclosure.

Intended for 1kg non cardboard spools (64mm max)

Along with the correct length M3 screws, you will need 4 bearings per holder: https://amzn.eu/d/5Vk2Zgq

With minimal supports, the base snaps together in 3 parts. The centre part comes in 2 versions to assist with alignment during installation.

Tightening the assembled rollers into the respective parts of the base completes the model which can in turn be fastened to the floor of the encolsure.

While designed for 1kg spools, the model is compsed so as to allow you to modify the scale of the relative x and/or y axis of the SIDES, AXEL and CENTRE aspects to suit your needs.

Modular Spool Holder (1kg Space Saver)

Centre_1ofeach.3mf

Heated Vacuum chamber components.
Intended for Premium Quality storage boxes.

You will need several different lengths of M3 hex screws: https://amzn.eu/d/2mAghbn

I also used
Spool Holder Bearings : https://amzn.eu/d/gFGBCHk
Hinge bearings: https://amzn.eu/d/bWtEBpv
Switches: https://amzn.eu/d/4ma39Dr
Heater fan : https://amzn.eu/d/1KPGOKE


HVC-DryBox

I didn't make this one. I've ordered the hotend but decided to wait until it comes to begin trying to make anything for it. Seems so easy to mount I wonder how necessary an upload this is. I guess my verdict is waiting on delivery.

BIQU_H2 FULL HOTEND SETUP

Biqu_H2_Heatsink

HeatBreak

E3D V6 Nozzle 0.4mm

Axe_Bras

Silicone_Sock

Biqu_H2_Bras

Gear_2

Phaetus_HB

Gear_1

Biqu_H2_Motor

Biqu_H2_Interface_Moteur

Arm_Gear

3511_Fan

I didn't design this one. Intended to assist machine modification designs.

FULL ENDER 3 v1 MACHINE 

FULL ENDER 3

ASM Frame

4040 profile

4040-3 profile

2020-2 profile

2040-3R profile

2040-3L profile

2020 Endcap

M5X45 Socket Head Screw

ASM X-Axis

2020 profile

Z Stent

X motor bracket

42-34 motor

z nut

E motor bracket

X limit switch bracket

X belt

limit switch

2GT-pulley

Copper cover

M4 Split Washer

M3 Split Washer

M4X16 Pan Head Screw

M3X40-P

M3X10 Pan Head Screw

M3X6Pan Head Screw

ASM Eccentrical Roller Z-Axis Left

Rollers

Eccentric column

Spacers for rollers

M5X40 Pan Head Screw

625pillow

M5 Self-locking nut

ASM Roller Z-Axis Left

ASM Extruder

40-42 motor

624U pillow

M3X18 Socket Head Screw

Extrusion Spring

E gear

E housing 2

E idler tensioner

M3X10 Flush Head Screw

M6 Pneumatic joint

M4X8 Socket Head Screw

Including support plate for inner side of enclosure.

Requires bearing: inner 10mm, outer 30mm, thickness 9mm

Hinges

LEFT.3mf

Feet.3mf

FootBase.3mf

You will need to drill holes into the enclousre to accomodate the fan, m3 screws and wire.

Revision 1 pertains to the Guard.3mf and is the removal of the non adjustable air disperser for the inner most layer of this module. Its replaced by a stubborn hinge which allows for better control of airflow whether in or out of use.

GRILL Protects outermost of fan
BACKPLATE spaces fan blade rotation away from enclosure
GUARD disperses heat extraction so as to prevent sudden temperature changes within the atmosphere of the enclosure.

60x60 FrontFanGuard.3mf

Grill.3mf

REVISION1.3mf

Dont Use PLA

* Installed to inside wall of enclosure.

You will need to make a hole in enclosure:
Use FRONT model to trace desired location on enclosure, including screw holes and switch and power supply clearance.

- Reverse the screws, tighten nut from the outside.
- Then place SEALmodel on top of tightened nuts.
- Then place that to inside wall, place FRONT model on outside wall over screws.
- Finally place nuts on outermost, tightening FRONT to enclosure by way of reverse screws first installed. 

Power Switch Panel

Back.3mf

All-in-One Extruder mount, Fan mount and Cable Organizer.

Support Required, Raft Recommended.



Recommended Application:

1, Apply the hook under the Hotend wires and loosely fix the bottom 1 of the 2 vertical screws on the reverse of the Cradle, to apply the Cradle to the H2.

2, Put the first front screw (upper one of diagonal pair) between the printer and Cradle through the hole (on the front of the Cradle) through the Cradle, just to put it in place on the Cradle - not to screw it into the printer yet.

3, Apply the 2nd of the vertical screws on the reverse of the Cradle, tightening them both, securing the Cradle to the Hotend, with the first front screw of the previous step hanging in place.

4, Slide the wire of Fan1 (red+black wire) between the air outlet and the nozzle, so as to slide Fan1 into place (but not screw in yet).

5, Apply the 2nd of the diagonal pair of screws so as to mount the Cradle to the printer.

6, Screw in the 2nd fan, using the original screws, just tightly enough to catch the thread of the Hotend and lock in place, baring in mind the strength of the plastic.

7, Pull the Fan2 wire (blue+yellow wire) behind the Cradle across to past Fan1, allowing the wire to sit in the groove as you put Fan2 in place, screwing it in at the top right hand corner.



BIQU H2 Ender3 Cradle

All-in-One Extruder mount, Fan mount and Cable Organizer.

Support Required, Raft Recommended.



Recommended Application:

1, Apply the hook under the Hotend wires and loosely fix the bottom 1 of the 2 vertical screws on the reverse of the Cradle, to apply the Cradle to the H2.

2, Put the first front screw (upper one of diagonal pair) between the printer and Cradle through the hole (on the front of the Cradle) through the Cradle, just to put it in place on the Cradle - not to screw it into the printer yet.

3, Apply the 2nd of the vertical screws on the reverse of the Cradle, tightening them both, securing the Cradle to the Hotend, with the first front screw of the previous step hanging in place.

4, Slide the wire of Fan1 (red+black wire) between the air outlet and the nozzle, so as to slide Fan1 into place (but not screw in yet).

5, Apply the 2nd of the diagonal pair of screws so as to mount the Cradle to the printer.

6, Screw in the 2nd fan, using the original screws, just tightly enough to catch the thread of the Hotend and lock in place, baring in mind the strength of the plastic.

7, Pull the Fan2 wire (blue+yellow wire) behind the Cradle across to past Fan1, allowing the wire to sit in the groove as you put Fan2 in place, screwing it in at the top right hand corner.


I should say, there are a couple minor tweaks yet to complete, including moving the 2nd Carriage to printer (diagonal pair) screw down about 4mm and allowing the first of those 2 screws to sit more flush with the side surface.

Designed to mount the 0.96 Inch OLED Module 12864 128x64 SSD1306 to an SG90 Servo motor head for rotating display

I2C 0.96 inch Screen Holder

Stabilizes the foot print of the servo, can screw into work top or use double sided tape.

SG90 Servo Cup Holder

Mount for a wireless keyboard or tablet of up to 12mm depth. Intended for either screw or double sided tape adhesion. Symmetrical, requires 2x prints 

KeyboardMount.stl

The neck of the 1.5L Cocacola bottles are smaller than water bottles so I designed it for that at 1mm thickness though I'm sure you could Vase mode it but I'm guessing you will want a little weight to your funnel.

SimpleFunnel.step

FOLCoaster.stl

YYCoaster.stl

Intended for up to 24.8mm diameter. I should have probably made it wider but it should support whatever weight you would reasonably apply

Filament Hanger

Right-Hand side of filament holder intended to be used with a suitably cut wooden curtain pole (or broom stick etc). 

Right Hanger.stl

Designed to replace the Velcro fob style guide which came included with the Mosaic Palette 2 Pro etc. however it makes  great filament guide if top loaded in my experience.

Ender 3 Filament Guide (Palette compatible)

I measured my Y axis as 45mm wide and the back drop as 36.5mm from the other vertical surface (front).

Ender 3 Pro - Y Axis Tensioner Cover

Experimental attempt to provide shock absorption by using the original bed springs.  I would recommend stretching springs before hand as I found there to be little travel between the two halves.

Ender Feet (Shock Absorbers)

ENDER FEET

I would recommend stretching springs before hand as I found there to be little travel between the two halves.

UPPER

LOWER

ASM Y-Axis

ASM Z-Axis

ASM Display

ASM Electronic Enclosure

ASM Spool Holder

ASM Power Supply

lowLEFT.3mf

lowRIGHT.3mf

upLEFT.3mf

upRIGHT.3mf

Sides_x1set.3mf

Axel_x1set.3mf

AxelCap_x1set.3mf

AxelEdge_x1set.3mf

Would be great to work on design projects, or fulfil requests. I consider myself very much a student though with flair and my touchdown in this field would be getting hired on a regular basis to design stuff. My personal goal is to make a magnetic generator 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

AlphaZen

Achievements

Seedling

Fan Favorite

Pinned models

FULL ENDER 3 v1 MACHINE

Hinges

Modular Spool Holder (1kg Space Saver)

Camping / Unboxing Tool

All in One BIQU H2 Mount

PSU MOUNT.3mf

Modular Spool Holder (1kg Space Saver)

HVC-DryBox

BIQU_H2 FULL HOTEND SETUP

FULL ENDER 3 v1 MACHINE

Hinges

Feet.3mf

60x60 FrontFanGuard.3mf

Power Switch Panel

BIQU H2 Ender3 Cradle

I2C 0.96 inch Screen Holder

SG90 Servo Cup Holder

KeyboardMount.stl

SimpleFunnel.step

FOLCoaster.stl

YYCoaster.stl

Filament Hanger

Ender 3 Filament Guide (Palette compatible)

Ender 3 Pro - Y Axis Tensioner Cover

Ender Feet (Shock Absorbers)