Heated Vacuum chamber components.
Intended for Premium Quality storage boxes.

You will need several different lengths of M3 hex screws: https://amzn.eu/d/2mAghbn

I also used
Spool Holder Bearings : https://amzn.eu/d/gFGBCHk
Hinge bearings: https://amzn.eu/d/bWtEBpv
Switches: https://amzn.eu/d/4ma39Dr
Heater fan : https://amzn.eu/d/1KPGOKE


Including support plate for inner side of enclosure.

Requires bearing: inner 10mm, outer 30mm, thickness 9mm

Hinges

LEFT.3mf

Feet.3mf

FootBase.3mf

You will need to drill holes into the enclousre to accomodate the fan, m3 screws and wire.

Revision 1 pertains to the Guard.3mf and is the removal of the non adjustable air disperser for the inner most layer of this module. Its replaced by a stubborn hinge which allows for better control of airflow whether in or out of use.

GRILL Protects outermost of fan
BACKPLATE spaces fan blade rotation away from enclosure
GUARD disperses heat extraction so as to prevent sudden temperature changes within the atmosphere of the enclosure.

60x60 FrontFanGuard.3mf

Grill.3mf

REVISION1.3mf

Dont Use PLA

* Installed to inside wall of enclosure.

You will need to make a hole in enclosure:
Use FRONT model to trace desired location on enclosure, including screw holes and switch and power supply clearance.

- Reverse the screws, tighten nut from the outside.
- Then place SEALmodel on top of tightened nuts.
- Then place that to inside wall, place FRONT model on outside wall over screws.
- Finally place nuts on outermost, tightening FRONT to enclosure by way of reverse screws first installed. 

Power Switch Panel

Back.3mf

Dont use PLA if installing into an enclosure.

Intended for 1kg non cardboard spools (64mm max)

Along with the correct length M3 screws, you will need 4 bearings per holder: https://amzn.eu/d/5Vk2Zgq

With minimal supports, the base snaps together in 3 parts. The centre part comes in 2 versions to assist with alignment during installation.

Tightening the assembled rollers into the respective parts of the base completes the model which can in turn be fastened to the floor of the encolsure.

While designed for 1kg spools, the model is compsed so as to allow you to modify the scale of the relative x and/or y axis of the SIDES, AXEL and CENTRE aspects to suit your needs.

Modular Spool Holder (1kg Space Saver)

Centre_1ofeach.3mf

Designed to replace the Velcro fob style guide which came included with the Mosaic Palette 2 Pro etc. however it makes  great filament guide if top loaded in my experience.

Ender 3 Filament Guide (Palette compatible)

HVC-DryBox

FULL ENDER 3 v1 MACHINE 

I didn't design this one. Intended to assist machine modification designs.

FULL ENDER 3

ASM Frame

ASM X-Axis

ASM Y-Axis

ASM Z-Axis

ASM Display

ASM Electronic Enclosure

ASM Spool Holder

ASM Power Supply

lowLEFT.3mf

Sides_x1set.3mf

Would be great to work on design projects, or fulfil requests. I consider myself very much a student though with flair and my touchdown in this field would be getting hired on a regular basis to design stuff. My personal goal is to make a magnetic generator 

AlphaZen

Achievements

Seedling

Fan Favorite

Explorer