tracking pixel
Adelin T

cr-10 Smart hotend fan support

by
Adelin-95
Follow
Follow
Remix Model
Adelin-95
Adelin-95
Image 1 of 4
cr-10 Smart hotend fan support 3d model
Adelin-95
Adelin-95
Image 1 of 4
cr-10 Smart hotend fan support 3d model
2D
3D
Makes
cr-10 Smart hotend fan support 3d model
cr-10 Smart hotend fan support - The duct is close to the heatsink so no air is blown down - 3d model
cr-10 Smart hotend fan support - The hook holds the whole hotend assembly from being pushed down when filament is extruded, so the Aux leveling could/should be smaller. - 3d model
cr-10 Smart hotend fan support 3d model
7 Likes29 DownloadsAugust 29, 2021


This is for the cr-10 smart printer, it replaces the white plastic between the heatsink and the fan. It does not let air to be blown under the heatsink, hitting the hotend. And it has a support that anchors on the metal bracket so that the hotend is not pushed down when the filament is extruded. I used Petg, hope it lasts.


7 Likes29 DownloadsAugust 29, 2021




7 Likes29 DownloadsAugust 29, 2021