Shutter Box - Tea Box

https://youtu.be/6Nzt53SJRzs

Printing

• All parts can be printed without supports 2 perimeters and 10% gyroid infill is sufficient. Most of the design is perimeter walls. Shutter can be printed in PLA, but avoid silk or matte PLAs. These are often extremely brittle. Customize the sign in CAD or Prusaslicer's text tool (alpha release)

Options

• Size: Large or Small. With careful placement, a small case can be printed on a Prusa Mini.
• Sign: Print vertical for or flat to support filament swaps and custom text.

Assembly

• Slide shutter into the track in the bottom case.
• Align the top case.
• Add staples to hold two halves together. Glue if needed.
• Insert sign. Glue if needed.

Can I sell copies of this? Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

Click here for attribution examples