Here is another Valentine fidget you’re going to ❤️

Dimensions of Twisty Heart Fidget: approx. 1 ½ in. x 1 ½ in.

How to Print: Basic PLA works great (see directions below for printing with Silk PLA or Matte PLA) 0.20mm Layer Height Infill 0% No Supports Arachne Wall generator selected on

I have including the following 3mf Project File: Print Plate #1 Twisty Heart Fidget (settings for Basic PLA): one color, Arachne wall generator selected, 0% Infill

Print Plate #2 Twisty Heart Fidget (settings for Silk PLA or Matte PLA): one color, Arachne wall generator selected, 0% Infill, Out Wall Speed 50 mm/s & Inner Wall Speed 100 mm/s

Please note: The Twisty Heart on Print Plate #1 and #2 are the same - but plate #1 has settings for printing the heart in Basic PLA and plate #2 has settings set for printing the heart in Silk PLA or Matte PLA.

I slowed down the wall speeds for the Silk and Matte PLA’s for a smoother finish and better articulation/movement:)

Also, ensure your print plates are clean and your filament dry for the best adhesion and print quality. You can also use a little glue on the print bed for added grip 💪

Have fun printing!! 💕 Erin