This Twisty Fidget Tree is the latest addition to my collection of tree fidgets! 🌲🌲🌲 Due to the tolerances of the print and it’s spiraling shape, I highly recommend you use my settings 😊

3D Printing Instructions: PLA works great 0.2mm Layer Height 15 % Infill Wall loops 3 Outer Wall Width 0.6mm Inner Wall Width 0.6mm X-Y Hole Compensation -0.05 mm Elephant Foot Compensation 0.1 mm Arachne Wall Generator turned ‘on’ Outer Wall Speed 50 mm/s Inner Wall Speed 100 mm/s

I have included a 3mf Print Project with the following settings: Print Plate #1 (Twisty Tree_no star): 1 color

• Wall loops = 3
• Outer wall & Inner wall Width 0.6mm
• X-Y Hole Compensation -0.05mm
• Elephant Foot Compensation 0.1mm
• Arachne Wall Generator ‘on’
• Outer Wall speed 50mm/s
• Inner Wall Speed 100mm/s

Print Plate #2 (Twisty Tree_with star): 1 color

• Wall loops = 3
• Outer wall & Inner wall Width 0.6mm
• X-Y Hole Compensation -0.05mm
• Elephant Foot Compensation 0.1mm
• Arachne Wall Generator ‘on’
• Outer Wall speed 50mm/s
• Inner Wall Speed 100mm/s

Print Plate #3 (Star peg): 1 color, no supports

Assembly: To assemble the Twisty Fidget Tree with Star, insert the star peg into the top. Add super glue to secure if needed.

Have fun printing! 🌲 Erin