tracking pixel
Alexis C

Soap Dish

by
3DPONTO
Follow
Follow
Remix Model
3DPONTO
3DPONTO
|
Image 7 of 9
Soap Dish 3d model
3DPONTO
3DPONTO
|
Image 7 of 9
Soap Dish 3d model
2D
3D
Makes
instagram-play
Soap Dish 3d model
Soap Dish 3d model
Soap Dish 3d model
Soap Dish 3d model
Soap Dish 3d model
Soap Dish 3d model
Soap Dish 3d model
Soap Dish 3d model
Soap Dish 3d model
This model is restricted by licensing terms. 

🧼 Upgrade your home space with a sleek, 3D-printed soap holder dish.

This model was designed with a minimalist octagonal aesthetic and engineered to provide a functional and unmatched practicality to your daily routine.

The angled base has been carefully designed and tested to guide water toward the front opening, ensuring smooth and efficient drainage while keeping your soap dry and clean. The geometric lattice design further promotes airflow and prevents water from pooling, allowing the soap to dry faster and last longer. Together, these features help prevent water buildup, ensuring a tidy, mess-free sink or countertop.

The 3DPONTO Soap Holder Dish includes two parts:

  • 1 Base: A sturdy platform with an angled design to direct water flow toward the frontal opening, ensuring efficient drainage and stability.
  • 1 Dish: A removable top tray featuring a geometric lattice pattern that promotes airflow and allows water to pass through, keeping your soap dry and clean.

Features:

  • Modern Geometric Design: Sleek octagonal shape with a lattice-style surface.
  • Durable and Easy to Print: Designed for ease of 3D printing, compatible with various materials (PLA, ABS, etc.).
  • Angled Base for Easy Drainage: Water is naturally directed toward the front opening, allowing for quick and mess-free drying.
  • Versatile Use: Perfect for any bathroom, kitchen, or laundry room.
  • Eco-Friendly Solution: Avoid disposable plastic trays and opt for a durable, reusable holder.

Printing Tips:

  • No supports needed when printing the base at a 90 degree angle (as seen in the picture).
  • The models shown in the pictures were printed at 100mm/s. Faster speeds may cause warpings on the edges of the base, however, these warpings shouldn’t affect any fittings with the dish or functinality of the design.
  • The base can also be printed at a 45 degree angle on one side (instead of using the back of the model), with supports added to the bottom part to handle the model's weight. Slower print speeds are recommended to reduce the risk of failed prints. This setup improves water drainage but requires a more precise and careful slicer configuration.

Recommended Printing Settings:

  • 0.2mm layer height
  • 80-100mm/s speeds
  • 10%-15% infill for base
  • 5%-10% infill for dish
  • Brim build plate adhesion
  • No supports needed when printing the base at a 90 degree angle (as seen in the picture)

Have questions or need support? Feel free to send us a message directly!

Follow 3DPONTO on Instagram to discover more about our designs and stay updated on our latest monthly releases.

Download and add this functional piece to your home today!

Liked this design? Check out our other models on our profile!


1 Likes1 DownloadsNovember 4, 2024


1 Likes1 DownloadsNovember 4, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %
SupportsNone
BrimNo