layer height: 0.2mm line width outer wall: 0.69mm walls: 0 top shell layers: 0 bottom shell layers: 0 infill density: 25% infill pattern: Grid infill anchor: 1000 (unlimited) max infill anchor: 1000 (unlimited) infill direction: 45 detect narrow internal solid infill: no speed sparse infill: 18 mm/s speed walls: 12 mm/s reduce infill retraction: no enable support: yes, threshold angle 1, on build plate only, 2 support enforcers: front and middle

due_1:

walls: 1 line width sparse infill: 0.3mm object flow ratio: 1.1

due_2:

line width sparse infill: 0.3mm object flow ratio: 2

due_3:

walls: 12

filament:

Retraction: 1.8mm Wipe: no Z hop: 1.2mm, Normal type Max volumetric speed: 2.5 mm^3/s Temperature: 215C - 225C

website: https://www.riverfamily.art/

made with Stepan: https://drunks.st/