Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
In the meantime, there have been numerous requests for us to make airplanes. However, due to the nature of the shape of the airplane, there are many thin parts, so printing and assembly are difficult. So while designing other things, I continued to explore the possibilities. And I decided that I had accumulated enough experience and know-how, so I finally made it.

A Dauntless SBD dive bomber that was very successful in defeating the Japanese at the Battle of Midway.

The difficult part in designing this plane was to assemble it separately so that the angle of the flaps on the wing could be changed. For this I made small custom supports on the wings and flaps. These supports can be easily removed with pliers or cutting nippers. However, if these supports are not completely removed, the wings and flaps will not be connected, so please be careful that the supports are completely removed. It would be nice to trim it using a cutter.

There are a few caveats to printing and assembling this plane.
1. If you apply excessive force while connecting the flap, it may break. When printing the flap, it is recommended to set the infill to 100% and print very strongly.
2. It is recommended that the flap be fixed at the desired angle with adhesive.
3. To prevent the wheels from swinging, I made a clip that the original plane didn't have, so if you put it on, the wheels will not swing.

Please refer to the video for the printing and assembly process.
https://youtu.be/al63fmKa4BI

We wish you a lot of love for this first 3D printed airplane we designed.

1 : 48 Scale
Largest part in printing, size = X 96mm, Y 134mm, Z 83mm, After full assembly size= X 264mm, Y 211mm, Z 74mm

SBD Dauntless Dive Bomber

GOODesign_SBD-Dauntless-Dive-Bomber_Fuselage.stl

It is the American Sherman tank that received many requests from people while designing the WWII tank series with a folding structure. The reason it was put off despite many requests is that the Sherman Tank's wheels and track structures are unique and complex. Moreover, the size of the Sherman tank itself was so small that it was very difficult to make this complex structure by folding. So we spent a lot of time designing. But I did it in the end!

The folding process is as follows:

1. Insert the front part of the tank body.
2. Put the side part on the top, and then the front part.
3. Raise the lower-rear part and rotate the protrusion to insert it into the front part.
4. Put the 6 wheels on the body.
5. Fit the front cog wheels and then the rear wheels.
6. Connect tracks to make two pairs.
7. Put the tracks around the wheel, then connect the start and end of the tracks.
8. Slide the cannon through the hole in the cannon part and then insert it into the turret.
9. Glue the two parts in front of the body.
10. This design may be difficult to print due to its small size and many sophisticated parts. Therefore, it is strongly recommended to print large.

If the wheel suspension is loose, attach it with adhesive. When using glue, be careful not to stick to the wheels.

Track rolls better and better with a lot of movement.

https://youtu.be/6ovzANifT38
https://youtu.be/ENdpJa8oCBQ

1 : 48 scale

When expanded, size = X 166mm, Y 152mm, Z 79mm After folding X 60mm, Y 123mm, Z 60mm



Foldable tank sherman

GOODesign_Foldable_Tank_M4-Sherman_Hull.stl

Get commercial license and download newest models- https://www.patreon.com/goodesign
Recently, a lot of customers are asking me to make the surrounding items of the product together whenever I release a new product.

Likewise when we unveiled the folding jeep, many people asked the request to build a Jeep trailer.

Download Foldable JEEP- https://cults3d.com/en/3d-model/game/foldable-willys-mb-jeep

So this time I designed a trailer for the foldable Jeep.

https://youtu.be/4wpWGcjbPBI

Experience the Jeep at the time with a Jeep trailer that shows the various uses of Jeep in World War II!



Foldable Jeep Trailer

GOODesign_Foldable_Jeep_Trailer.stl

Get commercial license and download newest models- https://www.patreon.com/goodesign
At the request of many customers, I designed a foldable humvee. The military humvee is very large, almost the size of a small tank. So, I put a lot of effort into making the unfolded size smaller so that it can be printed on ordinary 3D printers.

Many customers requested that the tires be printed separately and designed to fit, but this time we applied that request.

The process of folding and assembling this foldable military humvee is as follows.

Fold the engine and windshield slightly to fit.
Insert both side parts into the roof parts of the humvee.
Align the front and rear parts with the side parts in a good fit.
Press the lower part of this car into the front part and the rear part.
Fit each of the 4 tires.
Glue the front and rear bumpers.
It is complete by inserting the roof parts.
Please watch the video for more details.

Prusa print- https://youtu.be/OWTi2nzJIs4
Ender 3 print- https://youtu.be/HOHgWZOEy_w

1 : 35 scale

When expanded, size = X 173mm, Y 183mm, Z 45mm After folding X 64mm, Y 140mm, Z 56mm

Foldable Humvee/Hummer

GOODesign_Foldable_Humvee.stl

Get commercial license and download newest models- https://www.patreon.com/goodesign
With the request and high vote from FAB365.net's request page, I designed this foldable Willis Jeep.

Through this folding Willis MB Jeep, I made my first convertible car. The convertible car requires a lot of work as it is necessary to make a chair and interior, and there is little space to put the structure. In this work, I found it very difficult to make a convertible car by folding it.
This time, I inevitably adopted a way to separate the wheels. And some parts were printed and attached separately. The hood can be opened and closed, and the windshield can be rotated forward. The wheels also roll very well.

The folding process is as follows.
1. Rotate the front part of the jeep and turn it over.
2. Connect the lower body to the upper body.
3. Close the hood and move the windshield forward and tilt it back.
4. Press and fit each of the four wheels.
5. Put the fuel tank base on the back and put the fuel tank on top.
6. Attach the spare tire to the rear of the vehicle.
7. Cut the filament to a length of 18mm, fit it on the steering wheel, and apply adhesive to the front hole of the driver's seat.

Check youtube videos about folding process below.

1 : 32 scale
When expanded, size = X 73mm, Y 104mm, Z 37mm After folding X 50mm, Y 108mm, Z 52mm

usarmy

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

SBD Dauntless Dive Bomber

Foldable tank sherman

Foldable Jeep Trailer

Foldable Humvee/Hummer

Foldable Willys MB Jeep