Series/Movie accurate Mandalorian helmet. 

3D Printable Model, with STL files.

Scaled to size.

STEP file included.

A Boba Fett Helmet:
https://thangs.com/mattiashellberg95/Boba-Fett-for-3D-Printing-25461

Please let me know what you think.

Check out my other models at:
https://thangs.com/designer/Mattias%20Hellberg

Mandalorian Helmet

Series/Movie accurate Mandalorian helmet. 

3D Printable Model, with STL files.

Scaled to size.

STEP file included.

A Boba Fett Helmet will also be uploaded shortly.

Please let me know what you think.

Check out my other models at:
https://thangs.com/mattias.hellberg.95

The Mandalorian Helmet.STEP

Shroud your plays in mystery with these befuddlingly stealthy tiles for Hextraction, the hackable, 3D-printable board game.

With the lids off, these tiles look and act similarly to Basic and Flipper Tiles. But with the lids on, the inner workings are totally concealed, giving you a temporary informational edge while your opponents scratch their heads. Remember to pop the top off before you play it, to see what you've got! 

These actually behave a bit differently than the standard versions; to make them totally identical, I put notches in all six positions. This means you can make "illegal" paths that connect top edge to top edge, and bottom to bottom. Balls need a significant amount of momentum to pass through these, so use with caution, and if balls get stuck, you'll have to mentally track when you can remove the tile.

The Secret Flipper is also unique in that it has entrances on all six sides. The upper-left and upper-right entrances are actually always usable, always lead to the corresponding bottom edge, and always tip the flipper in that direction, so the sneaky sidegrade enables more advanced plays. The Secret Flipper uses the same flipper as the regular version, and installs the same way, so [visit that page](https://than.gs/m/856502) to download the missing piece and get assembly instructions.

The lids should fit the tiles snugly; loose enough to pry off, but tight enough to stay put during a shuffle. You may need to adjust your slicer's hole/circle settings, or slightly scale the Lid up. If you have a multi-material printer, drag the Lid and the Inlay into the slicer together, so the Inlay is aligned with the slot and question mark. Otherwise, print them separately, no supports, and glue the Overlay in place.

Fusion 360 source: https://a360.co/3pFeM4U

All of my Hextraction tiles have a built-in sacrificial support under each notch - remember to snap it off after printing. Enable the brim if these detach from the bed. 

Hextraction is a 3D-printable, modder-friendly board game designed by me, Zack Freedman of Voidstar Lab. In addition to tiles, you'll also need [10mm steel balls](https://amzn.to/3MqpN30) or [3/8" slingshot ammo](https://amzn.to/41Hs5PG) and [a game board](https://than.gs/m/856439). To learn the rules and how to get started, [watch the Hextraction video](https://youtu.be/Iqz7ZDdP25A)!

Hextraction is absolutely free - it's free of charge - all of my models are here on Thangs, commercial use allowed. It's free-form - you can play with any number of opponents, even zero. It's free to modify - you can create your own tiles and configure your own board.

For more information, visit https://playhextraction.com.

Hextraction Secret Tiles

Secret Flipper Example Assembly - Dont Print.step

**Collapsing Drill Sword**
_Multi-Color Print-in-Place Version_

This version prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU.

The Removable Blade Dual-Extrusion Version is available to my [Members.]( https://than.gs/m/913909)
_(pictures are of the dual extrusion replaceable blade version.)_

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on [how to print collapsing swords](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) on my website. If this is your first time printing, I would suggest you try the [test print](https://social.thangs.com/m/23601) first. 
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership](https://than.gs/u/35786?plans=true) 
To get permission to sell physical copies of my models, consider joining my [Patreon](https://www.patreon.com/3dprintingworld)



Collapsing Multi-Color Drill Sword

DRILL SWORD-MULTI-GUARD POMMEL.stl

The radial ribs on these vases create interesting effects when printed with multicolor filament. Be sure to print in “Vase” or “Spiralized” mode!

See here for video: https://youtu.be/abKomUYQukU 

This download includes small, medium, and large versions. 

More radial rib designs:
Fin Vases Square: https://than.gs/m/914327 

More multicolor vase designs:
Stinkhorm Vase https://than.gs/m/912791 

AI generated description:

Discover the unique Radial Rib Vases 3D model on thangs.com. Designed by DaveMakesStuff, these vases boast a distinctive radial rib texture that produces fascinating effects when printed with multi-color filament. These models provide an amazing addition to your home & garden decor. Please ensure to print in "Vase" or "Spiralized" mode for the best results. 

The downloaded zip file includes three different sizes: small, medium, and large, offering variety and versatility for your decorating needs. Explore more radial rib designs like the Fin Vases Square, and an assortment of multi-color vase designs like the Stinkhorm Vase on thangs.com to elevate your 3D printing projects. 

Make sure to view the different images and the video tutorial linked in the original description for a detailed visual reference. These 3D models are not just objects but a creative blend of style and technology in the world of 3D printing. Visit thangs.com now, and add the Radial Rib Vases to your collection of 3D models.

Radial Rib Vases

Radial Rib Vase (Large).stl

**Bigger is Better!**

A hollowed out version of ["Root Beer Barrel"](https://social.thangs.com/m/16404) Can Cup design for general storage use!  For anyone looking to decorate their space like "Ye Ol' Pub" or just because!  Print it at a larger scale for a fun Candy Bucket, or normal size for a Pen Cup on your desk. **(NOT FOR LIQUIDS or FOOD!)
**
Designed to look like a classic wooden "Root Beer Barrel" with "metal" bands.  Can be printed Multi-Color by doing a "Pause at Height" method of filament changes for the bands (See photos.).

Find the "Banana Lid" add-on Here: 
Or the "Pot-O-Gold" add-on Here: https://social.thangs.com/m/26325

*Measures 111mm Tall*

----------------------------------------------------------------

- **INCLUDED FILES:**
  - CAD STEP File for reference purposes.
  - The BIG Barrel STL file

---------------------------------------------------------------

- **PRINT PARAMETERS:** 
  - Supports REQUIRED under the Handles
  - 2 Perimeters (Walls/Shells) Recommended
  - 10%+ Infill Recommended
  - Scale up as you see fit. I printed mine at 250%

Mine was printed in [Polymaker "Matte Army Brown" PLA](https://amzn.to/3KeTYqg)

--------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.HotRodHippie.com/links

**Want to Buy a Can Cup?** Check out our "Authorized Sellers" List here: https://www.hotrodhippie.com/resellers

--------------------------------------------------------------

**All of my Designs are covered by a Creative Commons Non-Commercial License.**  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. *By downloading this design you are agreeing to these terms.* Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

**PLEASE Credit any and all Remixes of my designs: MandicReally**

The BIG Barrel - Pen Holder, Candy Dish, DND Dice Holder, WHATEVER!

Big_Barrel_V3.step

Vintage Car

Vintage Car.step

New Ring Design 
It's something new.
Let me know how it will look.

 

Gear Ring 

Gear Ring.STEP

Introducing the FDM (Fixum Dude Motors) print in place Jeep. 

Prints without supports. Samples are printed in PLA with 0.2 layer height, at least 3 perimeters, and 10%-15% gyroid infill. Examples printed in PolyMaker Silk Chrome PLA, Eryone Dual Color Blue/Green Silk PLA and an unknown gold silk PLA.

Fixum Dude Motors PIP Jeep 

#MakerMadness I am competing in the great showdown of designers. Please like this page to support me!

This **chunky boy** can hold plants, pencils, and much more for you while being a happy fella. 

[Here](https://youtu.be/XTVmuflnmxo) you can see a more detailed look at the design.

Check out [my Instagram](https://www.instagram.com/tomo_designs/) if you want to see more designs like this or if you have questions!

He prefers to be placed on your desk to help you out with holding onto all the important stuff.

He prints as one piece and you do **not** need any supports for his little bum. 

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

Chunky bum pot

This **chunky boy** can hold plants, pencils, and much more for you while being a happy fella. 
#MakerMadness
[Here](https://youtu.be/XTVmuflnmxo) you can see a more detailed look at the design.

Check out [my Instagram](https://www.instagram.com/tomo_designs/) if you want to see more designs like this or if you have questions!

He prefers to be placed on your desk to help you out with holding onto all the important stuff.

He prints as one piece and you do **not** need any supports for his little bum. 

New Ferrari F1 Model
Like and Share this Design 

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND


Ferrari F1-75

Ferrari F1-75.x_t

Here is the new Gear Ring
Check our Print, Share your Print images here

Print this Ring in your Printer




Gear Ring v2

Gear Ring V2.STEP

Each piece has a unique ripple pattern. These pieces are part of a series of vases and containers with ripple wave textures.

See here for video: https://youtu.be/xN7HYzL1kM4 

Other pieces in the series: 
Ripple Vase (Cube): https://social.thangs.com/m/262517 
Ripple Vase (Ovoid): https://social.thangs.com/m/262521



Ripple Vases (Round)

Ripple Vase Round Display only do not print.stl

Mr.Bean Car

Perfect for Holding your 12oz beverage in a Trashcan like receptacle.

Included files
• Step file for reference
• Can Body
• Lid
• Wheel (print 2)

Prints in 4 pieces (2 wheels, the can, and lid) and 1.75mm filament functions as the hinge and axle. For the axel to retain the wheel I melted a bit of the filament with a soldering iron and glued in place. 

Printed with Polymaker Green, Blue, and Black at 10% infill

Trash Can Cup 12 oz

Wheel R

Wheel L

Can Body

---

📝 Description

---

Introducing the Fantastic Planter "Spiral" version, a captivating work of art designed to bring nature's beauty into your space. The planter features gracefully spiraling vanes that lend an air of enchantment to its appearance. Embrace the fusion of artistic brilliance and practicality as you choose from three versatile sizes – small, medium, and large – to perfectly suit your surroundings. Elevate your botanical experience with the mesmerizing "Spiral" version, an extraordinary addition to any home or garden.
&nbsp;

---

🖨️ Printing Tips

---

Prints without supports.  Any reasonable layer height can be used. 
&nbsp;

---

🔗 Additional Information

---

3 Versions are available.  The Medium is shown in the picture.  Please do a simple water test by filling with water and letting it sit for 2 hours before checking for leaks.  Use a clear polymer sealer if you have any leaking but for most its not required. 

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.
&nbsp;

---

⚖️ License

---

**Free For Personal Use - Commercial Restricted License (with subscription)** 🟠

🔄 *Attribution* | 💼 *Free for Personal Use * | * Resale with Subscription*

&nbsp;

---

👥 Community

---

🌟 *Adore this model? Show some love to Rob, the one-man creative force behind Makers Mashup, and dive into more maker adventures!* 🌟

🎥 **Watch & Subscribe on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1)** - Assembly videos, tutorials, and much more. Don't miss out on new content!

🔗 **Join the Creative Journey on [Thangs.com](https://www.thangs.com)** - Follow me for the latest models and exclusive content.

🤝 **Engage with the [Community Discord](https://discord.gg/ZDKq5N2)** - Get help and advice from a large and vibrant community. Build anything with the support of fellow makers!

📲 **Get Social with Makers Mashup** - 🐦 [Twitter](https://twitter.com/MakersMashup) | 📸 [Instagram](https://www.instagram.com/makers_mashup/) | 👍 [Facebook](https://www.facebook.com/MakersMashup) - See work in progress, prints, and more.

❤️ **Support the Channel & Creator** - Your support makes a difference!
   - 🤝 [Patreon](https://www.patreon.com/makersmashup) – Support my ongoing work and get access to exclusive content!
   - 💸 Drop a tip: [Ko-fi](https://koji.to/k/8E9J)
   - 🛍️ Shop on Amazon? Click [this link](https://amzn.to/429HusI) before your next purchase. It helps the channel at no extra cost to you!

🔓 **Unlock Incredible Benefits**
   _with a Paid Subscription on [Thangs.com](https://www.thangs.com), or Select Tiers on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1) or [Patreon](https://www.patreon.com/makersmashup)_

   - Resale Abilities
   - Early Access to Models
   - Request New Models
   - Exclusive Discord Channel for Supporters with Behind-the-Scenes Content

🚀 *Let’s build, share, and grow together!* 🚀






Fantastic Planter "Spiral" version 

Fantastic Planter - Spiral - Medium.stl

Tessa Vase 
A vase with two interlaced tessalation patterns on the surface.

Prints without supports

See a timelapse here: https://vimeo.com/831086337?share=copy

Tessa Vase 1

Teesa 1 
A vase with two interlaced tessalation patterns on the surface.

Prints without supports

DEADPOOL - DECOR

3 Print-ready separator files

Support our work with your donation!  Thanks
https://www.paypal.com/donate/?hosted_button_id=RXNWN4KHFH7EG

Follow the youtube channel to help the channel and encourage more free creations
https://www.youtube.com/@Alienexplorer_pnz

DEADPOOL - DECOR

Dead Decor back.stl

VENOM - DECOR
2 Print-ready separator files

Support our work with your donation!  Thanks
https://www.paypal.com/donate/?hosted_button_id=RXNWN4KHFH7EG

Follow the youtube channel to help the channel and encourage more free creations
https://www.youtube.com/@Alienexplorer_pnz

VENOM - DECOR

Venom_Decor_Back.stl

If you are interested in something excellent design
Check out this _Monster Bus_

3D Designer



Monster Bus

Standing pirate gnome with cute little feet.

this model is a multipart design which means that you can print it in multicolor using your single extruder printer.

This model is for personal use only, if you want to sell physical prints of my designs, or you want to support me, please check out my patreon at: https://www.patreon.com/pressprint.

Happy printing

tire

Most Popular of All Time

Categories

Popular

Personalize

Trending