Red dot scope dew shield and dovetail adapter

red dot dew shield.stl

James Webb Space Telescope (JWST) Keychain

Base-v03 v8.3mf

Skywatcher LET 28mm - 2" Survey Eyepiece Cap

For whatever reason this eyepiece comes in a bag with no dust cap - This prints without support and is a snug fit

Dovetail telescope phone/camera insert

Unthreaded dovetail insert for a skywatcher finder holder, hole big enough for a standard camera mount screw

1.35 inch / 37.5mm telescope/eyepiece/focus tube plug

plug.stl

laser pointer spacer ring

laser_overlay.stl

2 inch EQ6-R tripod Cubby holder and flat table

cubby v6.stl

Pi Holder for Telescope 

This is a Raspberry Pi Case holder to mount on a telescope onto a Vixen style V-Rail. This has a built in  v-rail mount.

Telescope dovetail brackets (150, 200 & 250mm diameter) 

dovetail150.stl

Celestron / Uranum Telescope Tripod Tray

BaseFurada.stl

Celestron 80mm binoculars filter adapter

Celestron 80mm filter cover.stl

Galactic Observatory Desk Caddy

Galactic Observatory Desk Caddy.stl

Obi-Wan Kenobi’s Binoculars - Obi-Wan Kenobi

STL-ObiWan_Telescope_Whole-3Demon.stl

Sky Watcher Pillar Mount Caps

cap v2.stl

Accessory Mount for 8" Telescope

Tube Ring Accessory Bracket v3.3mf

EclipSmart 80mm Solar Filter Adapter for Sv503 80ED

EclipSmart-80mm-Solar-Filter-Adapter_Sv503_80ed_no_bevel.stl

space view (1) (1).stl

Telescope Leg Support

Telescope leg support for Heavy duty equatorial telescope mount.  

SkyWatcher EQ5 Pro Dec. gears cover

eq5_cover_v2.stl

GSO_6_Mirror_Extender.stl

This is a mirror extender for the GSO f/4 6" telescope, which is rebranded by other companies, like Apertura. The focal plane of the telescope normally is 186mm from the tube, this will extend the primary mirror distance to the sensor to make the focal plane at 135mm from the tube, which should also support most coma correctors and not let them block the lightpath. Additionally the secondary mirror is now able to easily support APS-C and potentially even Full Frame cameras, as based on several threads on cloudynights the secondary was not big enough for the lightcone produced by the primary.
Materials required:
3 M4x6mm screws
6 M4x4 Heated inserts with a 6mm diameter (I used these https://www.amazon.com/gp/product/B09ZNX3ZCS)

Recommended to print out of stiff material. PLA does work, but beware warping from heat, however you can print out of HTPLA and that should handle being left in a hot car after annealing.

Highly recommend to also flock this extender, as most plastics do create a shine that can cause minor reflections

telescope

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Red dot scope dew shield and dovetail adapter

James Webb Space Telescope (JWST) Keychain

Skywatcher LET 28mm - 2" Survey Eyepiece Cap

Dovetail telescope phone/camera insert

1.35 inch / 37.5mm telescope/eyepiece/focus tube plug

laser pointer spacer ring

2 inch EQ6-R tripod Cubby holder and flat table

Pi Holder for Telescope

Telescope dovetail brackets (150, 200 & 250mm diameter)

Celestron / Uranum Telescope Tripod Tray

Celestron 80mm binoculars filter adapter

Galactic Observatory Desk Caddy

Obi-Wan Kenobi’s Binoculars - Obi-Wan Kenobi

Sky Watcher Pillar Mount Caps

Accessory Mount for 8" Telescope

EclipSmart 80mm Solar Filter Adapter for Sv503 80ED

space view (1) (1).stl

Telescope Leg Support

SkyWatcher EQ5 Pro Dec. gears cover

GSO_6_Mirror_Extender.stl