Ghost Pop Beads

These “Ghost Pop Beads” snap together to form spooky chains or rings as long as you want! Use for decoration or to accessorize your costume.

See here for video: https://youtu.be/sqHG2kSpsd8 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the bottom end of one piece to open it up. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

This design is entered in the 2023 HalloweenWearable Contest

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 
Skull Pop Beads: https://than.gs/m/943349 


Knitted Pumpkin

Knit Pumpkin Body.stl

Earth Lithopanes

This is a Earth Lithopane for you to remix.
There are different sizes 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 225, mm and 250 mm on there.
It's designed for an FDM printer with a 0.4 mm nozzle. You may be able to print this with bigger nozzles, if you use the layer height and width i recommend.
Print settings:
Domes are quite hard to print. I never printed this as a whole, I always cut it into pieces first.
Layer Height 0.2 mm
Layer Width 0.4 mm
No supports.
I always decrease the speed at the top of the dome (when the bridging occurs) to 50%. You can do this in Cura using the extension post-processing.
I use standard white PLA for these. If you are unsure if your filament works, just shine through the walls of the print with your phone lamp at something like 10% print completion. You should see the Lithophane effect.

Remember to add me when you remix this, I'm eager to see what you do with this. I made some ready to print lamps with this, you can check them out at my site.

If you used this, please consider buying me a coffee at https://www.buymeacoffee.com/Ri0m0

Teardrop Pod Plain

This Teardrop Pod can be used to hang plants, moss, or any other small object. 
This version is designed for FDM printing. There are three similar versions that feature delicate lattice structures and are designed for resin printing.

See here for video of Plain Teardrop Pod: https://youtu.be/2bUXOdHXvWI 

Links for resin models:

Video of resin models: https://youtu.be/ZT0Dhcexz80 

Download links for resin models:
Teardrop Pod FCC Lattice: https://than.gs/m/889694 
Teardrop Pod Reentrant Lattice: https://than.gs/m/889700 
Teardrop Pod Truncated Cube Lattice: https://than.gs/m/889711 


Chain Link Gridfinity Bin 100mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm:


Christmas Tree

This is an easy-to-print, modern Christmas tree. Looks really well as a winter decoration. It can be printed in vase mode as well as standard mode.

---

**Recommended print settings**

- vase mode: yes
- bottom solid layers: 7
- extrusion width: 1 mm

Printing it with 1 mm extrusion width makes it solid enough.

This model prints nicely with fuzzy skin feature on it. It adds additional strength and hardiness to the walls.

When printing in standard mode, seam position should be set to aligned.

The tip of the tree should be printed slowly to avoid unwanted deformations.

Xmas Tree

Judge Dredd (fan art)

4L Screw-On Mount - Multipoint Rail Rings

4L Screw-On Mount - Multipoint Rail Rings.stl

Collapsing  Zanpakuto

ICHIGO 2-MULTI-GUARD.stl

Bidoof Christmas - Pokemon - Fan art

Bidoof xmas.stl

Hextraction W Tile

A mix between a DIC and a [https://thangs.com/designer/theethetree/3d-model/Hextraction%20-%20Strange%20simple%20tiles-878941](V Tile). If you orient it up then the sides are like on the DIC and the middle path randomizes between them. Any other orientation and it's mostly gonna funnel stuff, so yay for versatility.

Inspired by [cswenson's Latch Tile](https://thangs.com/designer/cswenson/3d-model/Hextraction%20Latch%20Tile-909909) but without the latch (though I redid the geometry with Zack Freedman's templates).

Blue M&M Mascot

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
I love these guys!  (Whole set ready soon)
***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

t

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ghost Pop Beads

Knitted Pumpkin

Earth Lithopanes

Teardrop Pod Plain

Chain Link Gridfinity Bin 100mm

Christmas Tree

Judge Dredd (fan art)

4L Screw-On Mount - Multipoint Rail Rings

Collapsing Zanpakuto

Bidoof Christmas - Pokemon - Fan art

Hextraction W Tile

Blue M&M Mascot

Lion Ring

Ferrari F1 2021

Sammy, the Ice Pint Holding Sloth

Captain Cody Helmet

Dragon bookends

Little Grass Dragon Keychain 🐉 - Articulated - Print in Place

Very Cute Axolotl - Articulated - No Supports - Print in Place

10 mm Mid Thread, Push-fit Head, Small Thread Hole, Shank Folded-Bolt