Hextraction Flash Freeze + Ice Block Tile

flash freeze tile.stl

Hextraction Spiral S Tile

spiral s tile.stl

Hextraction Copycat Tile

copycat tile.stl

Effect card for Lock and Key Tile

On Play: Take the key from the back
Once per turn: Lock or unlock the tile if you have a key (keep it)

An effect card for [cswenson's very cool Lock and Key Tile](https://thangs.com/designer/cswenson/3d-model/Hextraction%20Lock%20and%20Key%20Tile-919732). The text isn't the same.

Hextraction Gravity Storm Tile

gravity storm tile.stl

Hextraction Detonate Tile

detonate tile.stl

Hextraction XX Tile

Like 2 DC or 2 V tiles smooshed together, depending on your point of view. I think I've seen other people do a similar design, but I wanted one with a wider middle thing.

Most interesting feature is how it redirects balls if they attempt to leave through a blocked bottom side entrance (though it might need one ball to clog it up depending on orientation).

Hextraction W Tile

A mix between a DIC and a [https://thangs.com/designer/theethetree/3d-model/Hextraction%20-%20Strange%20simple%20tiles-878941](V Tile). If you orient it up then the sides are like on the DIC and the middle path randomizes between them. Any other orientation and it's mostly gonna funnel stuff, so yay for versatility.

Inspired by [cswenson's Latch Tile](https://thangs.com/designer/cswenson/3d-model/Hextraction%20Latch%20Tile-909909) but without the latch (though I redid the geometry with Zack Freedman's templates).

Hextraction Wrench Tile

wrench tile left.stl

Hextraction Sweep Tile

On Play: Remove all balls from the board

Take this broom to sweep away all those pesky balls from the board. This more or less resets every trap tile and undoes any setup for destroying tiles with the 3 balls rule or setting off Bomb tiles.

I haven't gotten to playtesting it yet so I'm not sure how relevant that ends up being in practice.

Rules clarification (as designed):
- The effect is mandatory
- All balls are removed "at once", so if you knock one out while trying to remove it, it won't trigger anything or win you the game (if it somehow ends in the end zone), likewise try your best to not mess up with mechanical parts in the process
- If a ball is part of a mechanism (like on Sozu tiles), then I'd say leave it in (but I won't stop you from sweeping it if you think it's fun and the tile's owner is ok)

Hextraction Swap Tile

On Play: Swap two adjacent tiles

A variation of the [Jerk tile](https://thangs.com/designer/ZackFreedman/3d-model/Hextraction%20Jerk%20Tile-856454) that lets you fiddle with already placed tiles, but twice as much.

If you place it horizontal it'll mostly act as an X, otherwise it will mostly funnel both entrances to the bottom center, so it's not fully like a DC or an X.

Rules clarification (as designed, you can house rule if you want):
- You swap 2 tiles that are _each_ adjacent to the placed Swap tile (the swapped tiles don't have to be adjacent to eachother)
- Swapped tiles have to keep their orientation, you can't rotate them
- Swapping is mandatory, unless it is impossible (if there aren't 2 adjacent tiles, or if the only tiles you can swap wouldn't fit (like a Built for Two or similar))
- An empty slot is not a tile, you can't swap with an empty slot

Hextraction Polygon Tiles

triangle tile.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Lykrast

Achievements

Novice Maker

Voyager

Seedling

Fan Favorite