Steeda Mount+Koni Yellow Protective Cover (Mustang S550)

Steeda Mount+Koni Yellow Protective cover.stl

MALLA  |  Woven Pendant light E26/27

MALLA_pendant-light_V1_Base-ring_Large.stl

ORB  |  String Art Pendant Light E27 & E26 fast print

ORB_pendant-light_V1_Bottom-disc.stl

HELIX  |  Pendant Light E27 & E26 fast print

HELIX_pendant-light_V1_Shade-Large.stl

Traxxas TRX-4m Suspension Spacer 3.6mm

Suspension Clip.stl

KETE  |  Pendant Light E27 & E26 fast print

KETE_pendant-light_Large_V4.stl

SKEP  |  Pendant Light E27 fast print

SKEP_pendant-light-Shade.stl

DVO Topaz Knob.stl

Flat Bottom Mount.stl

This is a flat mount that can be used at the bottom as a constraint for any rotating object.

It can be considered as an a-arm for small cars and two holes can be used to attach the mount to the chassis while the big hole can be used to insert the upright into place.

Compression spring - 90N

A working spring that generates about 90N (can hold 9kg) at solid length (without cracks or damages). Fatigue test has been performed up to about 4000 cycles without any damage (decay within admissible range of 5%). However according to calculation, it should have infinite life (engineering speaking).

⚠ ATTENTION ⚠
This spring is designed taking into account mechanical properties of PLA+. Any different material or setup will impact the declared performances.

☝ Do not scale the model. Any dimension change would impact performances and resistance.
✌ Print with 100% infill (layer height no more than 0.2mm). Printing direction is vertical with supports between coils. They will be easy to remove.
🤙 Make sure your printer is well tuned and you get proper layer adhesion.

📚I won't be explaining the whole design process that guarantees functionality and performances, but if you are interested you can contact me.

Also, if you need a specific spring of specific load, do not scale the following one cause it won't work. Spring has to be designed accordingly.

Data of the current spring:
Free length = 100mm
Outer diameter = 50mm
Inner diameter = 30mm
Solid length = 69mm ca.
Max force @solid length = 90N ca.

suspension

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Steeda Mount+Koni Yellow Protective Cover (Mustang S550)

MALLA | Woven Pendant light E26/27

ORB | String Art Pendant Light E27 & E26 fast print

HELIX | Pendant Light E27 & E26 fast print

Traxxas TRX-4m Suspension Spacer 3.6mm

KETE | Pendant Light E27 & E26 fast print

SKEP | Pendant Light E27 fast print

DVO Topaz Knob.stl

Flat Bottom Mount.stl

Compression spring - 90N