IKEA Kallax Shelf Divider

I designed this divider to split a compartment in half vertically on my [Kallax shelf](http://bit.ly/kallaX) from Ikea. This increases storage capability and it's super easy to print! I used a single shell and 5% infill with PLA on the Anycubic Chiron and it's still sturdy enough.



Requires a large print area! 330.2mm x 180.1mm x 381.0mm to be exact.

FHW: Demo Master with Helmet with mining pack

Demo Masters helmet set.stl

FHW: Oxchan/ Space Orc Walking Rocket v3

FHW _ Oxchan Rocket Jumper v3 set.stl

Bender keychains.stl

Keychain of bender with " And my butt is téflon ? " from Futurama show

If you want to see my work My insta : https://www.instagram.com/serialprinting/

Saturn Desk Lamp

Greetings!

I'm excited to present you with my Saturn Desk Lamp. This unique piece is sure to add a celestial glow to your workspace.

Here's what you'll need to assemble this lamp: a lamp socket and a bulb. I personally prefer a multicolored LED bulb, but the choice is yours. Please note, i designed this lamp specifically for this lamp socked ton ebay. You can make your own version, it just involves more effort because the parts might not fit.

EU Version:

EU Plug: https://ebay.us/ASMco5

EU Bulb: https://ebay.us/yB4Acp

US Version:

US Plug: https://ebay.us/yHsc2c

US Bulb: https://ebay.us/oTWuS1

Support my work by purchasing through these links!

On to the print settings:
For this project, you only need to print the files which are numerically labelled.

Saturn: Opt for a 0.4 mm nozzle. Alternatively, set your print to a line height of 0.2 mm and a width of 0.4 mm. Be aware that the domes can be challenging to print. I recommend reducing the print speed to 50% when you reach layer 670. Use 100% infill with concentric infill, or adjust your wall count to a high figure, such as 40. For material, any basic white PLA should suffice. I've found that Sunlu White PLA+ gives great results. Please steer clear of matte or glitter materials as they won't produce the desired effect. The good news is, you won't need any supports!

Holder: Unlike the Saturn part, you'll need to print the holder with supports.

Voila! Your Saturn Desk Lamp is ready to brighten up your space. If you've enjoyed creating this lamp, please consider supporting my filament needs by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a student, every bit of support helps!

In addition to this, you'll find more lamp designs on my profile, and there are more on the way! Feel free to reach out if you encounter any difficulties or if you have any suggestions.

Please keep in mind that this design is intended for non-commercial use only.

Enjoy lighting up your workspace with your very own Saturn Desk Lamp!

Hybrid Hanging/Desk Saturn Lamp

Introducing the mesmerizing Hybrid Saturn Lamp. With its versatile design, you have the option to either screw the legs out and hang it from the ceiling or use the convenient leg holder to keep them safe when not in use.

To bring the Hybrid Saturn Lamp to life, you'll need a lamp socket and a bulb. For an enchanting display, I recommend using a Multi-color LED bulb. Depending on your location, you can find suitable options through the following links:

EU Plug:
https://ebay.us/PRcPvm

US Plug:
https://ebay.us/hBRN1i

You support me by suing these Links! :D

Enhance the ambiance with the perfect bulb:

EU:
https://ebay.us/yB4Acp

US:
https://ebay.us/oTWuS1

You support me by suing these Links! :D

Print Settings:
To create this, you only need to print the numbered files. The additional files are included in case you require separate prints. When printing the Saturn model, use a 0.4 mm nozzle or set a line height of 0.2 mm and a width of 0.4 mm. The domes can be challenging to print, but I recommend slowing down the layers at the top to 50% print speed (around layer 670). Achieve optimal strength by using 100% infill with concentric infill, or you can set your wall count to a higher value, such as 40. Basic white PLA works perfectly; I used Sunlu White PLA+ for my model. Avoid matte or glitter filaments as they may not produce the desired effect. No supports are required for printing.

For the legs and plate, no supports are needed. For a visually appealing result, try positioning the seam on the inside of the legs. Feel free to choose any color that suits your taste.

Enjoy the captivating beauty of your completed Hybrid Saturn Lamp! If you find joy in this creation, please consider supporting my work by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. Every contribution helps me continue my filament-fueled endeavors.

Check out my profile for more incredible lamp designs, or stay tuned for upcoming releases. Here are some other mesmerizing hybrid lamps you might like:

Mercury: https://www.thingiverse.com/thing:6062935
Pluto: https://www.thingiverse.com/thing:6058417
Sun: https://www.thingiverse.com/thing:6036612
Mars : https://www.thingiverse.com/thing:6036600
Jupiter: https://www.thingiverse.com/thing:6036586
Football: https://www.thingiverse.com/thing:6036569
Asteroid Vesta: https://www.thingiverse.com/thing:6036559
Basketball: https://www.thingiverse.com/thing:6036547
Venus: https://www.thingiverse.com/thing:6034731
Moon: https://www.thingiverse.com/thing:6034515

Each lamp combines the beauty of space with stunning design. Explore the universe of possibilities!

Please note that this design is provided under a non-commercial license.

Hybrid Hanging/Desk Satrun Lamp

STARWARS - KEYCHAIN

Keychain.stl

FHW: Tunnel Rats Assault Sargent

Assault Sergeant set.stl

Milkyway Lithopanes

Hey,
these are Milkyway Lithopanes for you to remix.
There are different sizes 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 225, mm and 250 mm on there.
It's designed for an FDM printer with a 0.4 mm nozzle. You may be able to print this with bigger nozzles, if you use the layer height and width I recommend.
Print settings:
Domes are quite hard to print. I never printed this as a whole, I always cut it into pieces first.
Layer Height 0.2 mm
Layer Width 0.4 mm
No supports.
I always decrease the speed at the top of the dome (when the bridging occurs) to 50%. You can do this in Cura using the extension post-processing.
I use standard white PLA for these. If you are unsure if your filament works, just shine through the walls of the print with your phone lamp at something like 10% print completion. You should see the Lithophane effect.

Remember to add me when you remix this, I'm eager to see what you do with this. I made some ready to print lamps with this, you can check them out at my site.

If you used this, please consider buying me a coffee at https://www.buymeacoffee.com/Ri0m0

This one is shared under a non-commercial license.

WIRE FRAME FLOWER - DESK DECOR FIGURE FOR RESIN PRINTING

flower wire art.stl

Hybrid Hanging/Desk Space Nebular Lamp

Introducing the mesmerizing Hybrid Space Nebular Lamp, inspired by the beauty of our celestial neighbor. With its versatile design, you have the option to either screw the legs out and hang it from the ceiling or use the convenient leg holder to keep them safe when not in use.

To bring the Hybrid Pluto Lamp to life, you'll need a lamp socket and a bulb. For an enchanting display, I recommend using a Multi-color LED bulb. Depending on your location, you can find suitable options through the following links:

EU Plug:
https://ebay.us/PRcPvm

US Plug:
https://ebay.us/hBRN1i

You support me by suing these Links! :D

Enhance the ambiance with the perfect bulb:

EU:
https://ebay.us/yB4Acp

US:
https://ebay.us/oTWuS1

You support me by suing these Links! :D

Print Settings:
To create this, you only need to print the numbered files. The additional files are included in case you require separate prints. When printing the Pluto model, use a 0.4 mm nozzle or set a line height of 0.2 mm and a width of 0.4 mm. The domes can be challenging to print, but I recommend slowing down the layers at the top to 50% print speed (around layer 670). Achieve optimal strength by using 100% infill with concentric infill, or you can set your wall count to a higher value, such as 40. Basic white PLA works perfectly; I used Sunlu White PLA+ for my model. Avoid matte or glitter filaments as they may not produce the desired effect. No supports are required for printing.

For the legs and plate, no supports are needed. For a visually appealing result, try positioning the seam on the inside of the legs. Feel free to choose any color that suits your taste.

Enjoy the captivating beauty of your completed Hybrid Space Nebular Lamp! If you find joy in this creation, please consider supporting my work by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a struggling student, every contribution helps me continue my filament-fueled endeavors.

Check out my profile for more incredible lamp designs or stay tuned for upcoming releases. Here are some other mesmerizing hybrid lamps you might like:

Mercury: https://www.thingiverse.com/thing:6062935
Pluto: https://www.thingiverse.com/thing:6058417
Sun: https://www.thingiverse.com/thing:6036612
Mars : https://www.thingiverse.com/thing:6036600
Jupiter: https://www.thingiverse.com/thing:6036586
Football: https://www.thingiverse.com/thing:6036569
Asteroid Vesta: https://www.thingiverse.com/thing:6036559
Basketball: https://www.thingiverse.com/thing:6036547
Venus: https://www.thingiverse.com/thing:6034731
Moon: https://www.thingiverse.com/thing:6034515

Each lamp combines the beauty of space with stunning design. Explore the universe of possibilities!

Please note that this design is provided under a non-commercial license.

ALIEN KEYCHAIN 

Alien KEYCHAIN Back.stl

Wallace and Gromit Rocket

Wallace Rocket Top

Spacecraft Giraffe

Three Wolf Moon - Articulated Flexi Moon & Wolves (print in place) | Meme

articulated moon.stl

FHW: Zorblin Walking rocket APC

**Hello Tribe**

Just a concept for a Oxchan walker for fun.

Cheers
Maker Millwright

FHW: Rocket walker concept

PrintABlok Space Station Construction Kit

P470 Space Station.stl

Wall / Monitor - Hook & Pen Stand.stl

I'm kinda obsessed with organizers and desk space savers. So here is a combined one. 

Print it without any supports.

Modular Spaceship for Tabletop Wargames

28mm_Ship_01_Front_Top_with_Door_Support.stl

FHW: Weird Trooper with club

Hello Tribe 
This is the basic weaponized weird trooper, they drag an improvised club or other heavy swinging thing they can pick up.

Please enjoy

Cheers
Maker Millwright

space

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 111 new models

FHW: Demo Master with Helmet with mining pack

FHW: Oxchan/ Space Orc Walking Rocket v3

Bender keychains.stl

Saturn Desk Lamp

Hybrid Hanging/Desk Saturn Lamp

STARWARS - KEYCHAIN

FHW: Tunnel Rats Assault Sargent

View 15 new models

View 104 new models

Hybrid Hanging/Desk Space Nebular Lamp

ALIEN KEYCHAIN

View 14 new models

View 18 new models

Three Wolf Moon - Articulated Flexi Moon & Wolves (print in place) | Meme

FHW: Zorblin Walking rocket APC

View 27 new models

Wall / Monitor - Hook & Pen Stand.stl

Modular Spaceship for Tabletop Wargames

FHW: Weird Trooper with club