As fall becomes cloaked in bitter cold, birds take flight to warmer climates, except for one: The Canadian Plague Doctor Goose!

Hailing from Canada, this rogue goose dons his frightening costume with leather cloak, brimmed hat and ominous beak mask. His purpose? To stalk Halloween trick-or-treaters for their candy which is then given as treatment to all wounded and sick wildlife, including its fellow avian kind.

Be wary and guard your goodies!

If this creepy model satisfies your curiosity, head on over to my Facebook page to view my other 3D designs and prints: https://www.facebook.com/ScenestruckArt

If there are any problems with the models, please let me know. Constructive feedback is always welcome.

NOTES:
FDM tested (Ender 3 V2 Neo). SLA print at your own discretion

Print Temp: 205 C
Bed Temp: 50 C
Layer height:0.2mm
Infill: 5 - 15%
Supports: yes (tree supports work)
Speed: 50 mm/s
Filament: Sunlu Black (PLA)

Careful when placing supports around the legs (they may break).

Canadian Plague Doctor Goose

Plague Doctor Goose_Sitting.stl

Plague Doctor Goose_Standing.stl

Let's get ready to rumble with Cyclobber The Boxer!

Armed with nothing but his speed, courage and muscles, this tall blue cyclops takes to the ring to punch out his heavy bag in preparations for the upcoming match. With a devastating left hook, the heavy bag knows Cyclobber is ready to become the next heavyweight champion of the world.

If this sparks the warrior spirit in you, head on over to my Facebook page to view my other 3D designs and prints: https://www.facebook.com/ScenestruckArt

If there are any problems with the models, please let me know. Constructive feedback is always welcome.

**NOTES:**
- FDM tested (Ender 3 V2 Neo). Files sliced through PrusaSlicer 2.6.1

- Resin print at your own discretion.

- Glue may be required.

- The helmet is an optional piece. It can either be printed separated as a whole or split in halves, or attached to the torso.

**FDM settings:**

Print Temp: 200 - 205 C
Bed Temp: 60 -65 C
Layer height:0.12mm (all boxer parts), 0.16mm (Heavy Bag), 0.20mm (base)
Infill: 3 - 5%
Supports: yes
Speed: 40 - 65 mm/s

Filament (all PLA):

Esun: Light Blue, Purple
Anet: Red, Yellow

Cyclobber The Boxer

Cyclobber_Head Gear.stl

Cyclobber_Head Gear_Split.stl

Cyclobber_Heavy Bag.stl

Cyclobber_L-Arm.stl

Cyclobber_L-Glove.stl

Cyclobber_L-Leg.stl

Cyclobber_L-Shoe.stl

Cyclobber_Peg_Torso.stl

Cyclobber_Pegs_Arms.stl

Cyclobber_R-Arm.stl

Cyclobber_R-Glove.stl

Cyclobber_R-Leg.stl

Cyclobber_R-Shoe.stl

Cyclobber_Shorts.stl

Cyclobber_Stand_Heavy Bag.stl

Cyclobber_Torso w-Head Gear.stl

Cyclobber_Torso.stl

Get ready to defend the system of Mainframe with Guardian Bob!

Hailing from the iconic 90's CGI show Reboot, Bob and his trusty key tool Glitch, are here to mend and defend your 3D prints and printers from malicious viruses. When fully assembled, he stands 32 cm (12.6 inches) tall. There are also 2 full body figure versions of him available in both FDM and SLA format.

Have an alphanumeric time printing! 

If you like this model, visit my Facebook page to view my other 3D sculpts and prints, as well as additional pictures: https://www.facebook.com/ScenestruckArt

If there is a problem with the model, please let me know. Constructive feedback is always welcome.

**Notes:**

- FDM (Ender 3 V2 Neo) and SLA (Creality LD-002R) tested. Files sliced through PrusaSlicer 2.8.0, Cura 5.7.0, and Lychee 6.0.2.
- Glue may be required.
- All separated parts are designed for FDM, but may also work for SLA (scale down files as you see fit). For a proper resin print, use the "Full Body" file as listed.

**FDM settings:**

Print Temp: 200 C
Bed Temp: 60 C
Layer height:0.12 (hair) - 0.20 mm
Infill: 5 - 10%
Supports: yes
Speed: 40 - 60 mm/s

**Filament (all PLA):**

Esun: Blue, Light Blue
Creality: Orange, Matte Blue
Sunlu: Black
Flashforge: Silver
Anet: Yellow

**SLA settings:**

Layer Height: 0.05 mm
Light-Off Delay: 3 sec.
Exposure Time: 11 sec
Lift Distance: 5 mm
Lift Speed: 50 mm/m
Retract Speed: 150 mm/m

Resin: Creality UV Mint Green + Creality UV Sensitive Blue

Guardian Bob

Guardian Bob_Belt.stl

Guardian Bob_Biceps.stl

Guardian Bob_Body Peg.stl

Guardian Bob_Boots.stl

Guardian Bob_Chest.stl

Guardian Bob_Collar.stl

Guardian Bob_Forearms-bracers.stl

Guardian Bob_Full Body_FDM.stl

Guardian Bob_Full Body_SLA.stl

Guardian Bob_Glitch.stl

Guardian Bob_Hair.stl

Guardian Bob_Hands.stl

Guardian Bob_Head.stl

Guardian Bob_Icon Buttom.stl

Guardian Bob_Knee Pads.stl

Guardian Bob_Legs.stl

Guardian Bob_Shoulder Pads.stl

Guardian Bob_Stomach.stl

Santa Claus is coming to town!

Have a Very Merry Christmas with this Santa Claus Bobble Sleigh Decoration. Children will smile with delight as you shift his sleigh and reindeer back and forth on two sets of 3D printed springs, fitted onto a snowy rooftop.

Display this large model as a table centerpiece, on a book shelf, fireplace mantle, or perhaps under the tree, and let the Christmas spirit flow throughout your home and into the New Year.

Merry Christmas and Happy Holidays to All!

If this model brings you holiday cheer, then head on over to my Facebook page to view my other 3D designs and prints: https://www.facebook.com/ScenestruckArt

If there are any problems with the models, please let me know. Constructive feedback is always welcome.

**NOTES:**

**-- Previously released on Cults3D Winter 2023 --**

- FDM tested (Ender 3 V2 Neo). Files sliced through Prusaslicer 2.6.1.
- Recommend using glue to hold some pieces together.
- Highly recommend using supports for the springs (normal and/ or tree supports).
- The file "Sleigh_Reins" is optional. You can replace this item with string, twine, etc.

Complete model size:

Centimeters: 28L x 15W x 17H
Inches: 11L x 5.9W x 6.69H

**FDM settings:**

Print Temp: 200 - 205 C
Bed Temp: 60 -65 C
Layer height:0.12mm (Reindeer/springs/reins), 0.16mm (all sleigh parts), 0.20mm (base/pegs)
Infill: 3 - 10%
Supports: yes (tree supports work)
Speed: 40 - 65 mm/s

**Filament (all PLA):**

Anet: Red,
Creality: Avocado Green / White / Light Brown,
Esun: Glass Lemon Yellow

Santa Claus Bobble Sleigh Decoration

A_Base.stl

B_Base.stl

Base_Pegs.stl

Reindeer_All Parts.stl

Reindeer_Pegs.stl

Reindeer_Springs.stl

Sleigh_Body w-Santa and bag.stl

Sleigh_L-Side.stl

Sleigh_Reins.stl

Sleigh_R-Side.stl

Sleigh_Springs.stl

Hello 
My name is James and welcome to Scenestruck Art. I'm an amateur 3D modeler and printing hobbyist. If you like what you see here, please visit my Facebook page to view my portfolio.

Additional Paid models can be found over at Cults3D.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Scenestruck Art

Achievements

Debutant

Sapling