Over the Door Multiboard Snap Part A.stl

EZPZ Keyring 1" BEEFY // Keychain Ring

EZPZ_ring_1in_BEEFY.stl

EZPZ Keyring 1" // Keychain Ring

EZPZ_ring_1in.stl

Auxetic Tile // 30mm Checker Split

30mmTile_Checker_B.stl

Snap-Together Brown Bear - Head

Brown Bear.glb

Dastardly Dovetail Box (Round Magnetic)

DDround_Bottom_Magnetic.stl

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Keychain Witch Hat Snappy Cat  - (Snap-Flex: Medium Tightness Joint)

WHSC_Keychain_Medium_Both.stl

GripperHook

GH_hook.stl

KWOB Puzzle // Frame

Kwob_Frame.stl

Circular Hygrometer snap on 2020 extrusion

Since I did a design for the rectangular hygrometer, I thought it was not much more effort to do for a circular version.

Print in place with no supports, no additional mounting hardware required.

Orientate however you like!
*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
Hygrometer Thermometer
https://s.click.aliexpress.com/e/_DlQxosf

*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C

Hyperdodecahedron // Folding Polyhedra Pack No.1

This 4 dimensional dodecahedron prints flat and then folds and snaps into place! That means you can get cool multicolor parts on all faces with simple color swaps as well as crazy geometry without support material!

This is a freebie from my [Folding Polyhedra Pack No.1](https://www.myminifactory.com/object/3d-print-folding-polyhedra-pack-no-1-81865)

folding-polyhedra-pack-04-dodecahedron-dodecahedron-hyperplus.stl

Tetrahedrons // Folding Polyhedra

tetrahedronbig-wire.stl

Wireframe Icosahedron // Folding Polyhedra

[Relevant Video](https://www.youtube.com/watch?v=DXeR6tmcZCE)


This is the Wireframe Icosahedron from my [Folding Polyhedra Pack](https://www.myminifactory.com/object/3d-print-81865)! Print flat, fold, and snap together! This technique can produce super clean and satisfying prints. Enjoy :)

Basket Smalls (Basketball)

Display only do not print.stl

Egg Snaps

Pop Garland

Pop Garland Display only Do Not Print.stl

Low Friction Spool Holder Adapter

Low Friction Spool Holder Adapter

Are you like me and upgraded your bowden tube, but held on to the old one?

Well you are in luck!  Use it as part of this adapter to reduce friction between your spool and the spool holder.

Designed primarily for the Ender 3, but any similar spool holder should work.

Yes this is a mashup, however it does have significant changes and qualifies as unique work.  See license.txt for more details.

1. Cut two bowden tubes to fit in side of each track.
2. Remove the tube from your spool holder and snap on the adapter.
3. Put the tube back on the spool holder.
4. Enjoy

- Easy snap fit!
- Bowden tubes are low friction by design.
- The curved shape further reduces friction by limiting contact with the spool to two points.
- The curved shape uses gravity to keep the spool centered on the spool holder.

Supports are required. I would suggest using support blocker on the bowden tube holes, they seem to print fine.  

* I used tree supports and a brim.
* I printed at 5° hotter than normal to help with layer adhesion.
* I printed at 0.12 for a smoother look. However during testing I printed at 0.2 and it worked without issue.


snap

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Over the Door Multiboard Snap Part A.stl

EZPZ Keyring 1" BEEFY // Keychain Ring

EZPZ Keyring 1" // Keychain Ring

View 22 new models

Snap-Together Brown Bear - Head

Dastardly Dovetail Box (Round Magnetic)

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

View 17 new models

Keychain Witch Hat Snappy Cat - (Snap-Flex: Medium Tightness Joint)

GripperHook

View 78 new models

Circular Hygrometer snap on 2020 extrusion

View 20 new models

View 66 new models

View 111 new models

Basket Smalls (Basketball)

Egg Snaps

Pop Garland

Low Friction Spool Holder Adapter