Samson SR850 aux panel mount.stl

Hanging Basket Hook Repair

HangingHookRepair v1.3mf

 "Re-use me, please" - Reusable Spool

Re-use me_Reusable Spool_Wide.stl

Shower Cabinet - Glass Support for M5 40mm Screws

Encache do Vidro Poliban M5-40mm.stl

Shower Cabinet - Door Break

Trava Limitadora Poliban.stl

Shower Cabinet - Bearingless Door Wheel

Rolamento Poliban27mm.stl

FitBit Versa Alternate Strap/Holder

FitBitFinal.stl

EZPZ Jumpring 0.5" // Keychain Ring

EZPZ_ring_0.5in.stl

Ideal Pet Ruff-Weather Pet Door Magnet Retainer

Pet Door Magnet Retainer.3mf

Replacement Bathroom Fan Impeller (3/16" diameter shaft)

fan_replacement.stl

Replacement Microphone Holder

If your mic holder snaps like mine did hopefully this print can save the day. The connecting hinge is 5.8mm wide with a 7.2mm hole. I used my heat gun to better form the clip to my microphone, [as shown in this video](https://youtu.be/bxhblZbzzjM).

 

I printed at 0.15mm layer height with 7 shell thickness for a strong print that should last a long time.

8BitDo SN30 Pro+ Replacement Triggers

r-trigger.stl

OP-1 Knob Replacement

Replace your missing OP-1 knob or print it in custom colors with this replica of the original, re-designed to suit 3D printing. No supports required.

For more options, check out the [OP-1 Super Customizer Kit](https://www.myminifactory.com/object/3d-print-271154)

Photographed models were printed with [MatterHackers PRO series PLA](http://bit.ly/PRO-PLA)

servohorn.stl

ChatterBox Microphone Back

Replacement Back Cover for ChatterBox Microphone

Headband Adjuster

I've got a handful of headlamps that work great, but the elastic has worn out on the headband. New bands are generally north of $10, which is on par with a (cheap) new whole headlamp! Such inefficiency!

Instead, buy a roll of 1" elastic for about $10, then print as many of these hooks as you need, two per strap.

Cut a ~24 inch section of band (mine at 28 was longer than needed).

Fill the cups in the side of each clip with a bit of superglue, and slightly dampen the ends of the elastic before inserting them fully into the cups. 

Give the glue a minute to set, and you've got a new headband!

Sankyo Dualux 1000 Tripod Foot Repair

As the name suggests, this part repairs the front foot of an old Sankyo super 8 projector.  

I re-used the original threaded rod, and rubber base, and it's almost indistinguishable at a glance.

Caster Replacement Body

replacement_caster_body_for_storage_container.stl

iPad Stand Hinge Repair.stl

this is a replacement hinge for [this iPad stand](It's the only light i have strong enough to basically x ray 1/8" plywood for internal voids.)

I found success printing it in ABS 100% Infill, but this should be seen as a temporary part unless made in metal.

3D Printer Nozzle.stl

Here is a small replica of a nozzle used in 3D printers. There are no markings and it can be easily customized as required.

repair

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Samson SR850 aux panel mount.stl

Hanging Basket Hook Repair

"Re-use me, please" - Reusable Spool

Shower Cabinet - Glass Support for M5 40mm Screws

Shower Cabinet - Door Break

Shower Cabinet - Bearingless Door Wheel

FitBit Versa Alternate Strap/Holder

EZPZ Jumpring 0.5" // Keychain Ring

Ideal Pet Ruff-Weather Pet Door Magnet Retainer

Replacement Bathroom Fan Impeller (3/16" diameter shaft)

View 18 new models

View 66 new models

View 111 new models

servohorn.stl

ChatterBox Microphone Back

Headband Adjuster

View 13 new models

View 25 new models

View 14 new models

3D Printer Nozzle.stl