Calice Della Morte

Here is the file for “Calice della Morte” (the Chalice of Death)

The Calice della morte is an ancient artifact that was created by a powerful sorcerer named Lucius Malvolio during the Dark Ages. 

He became obsessed with finding the secret of immortality and performed many experiments on human subjects, using dark magic and alchemy. He discovered that by mixing the blood of a pure-hearted person with a rare potion, he could create a liquid that would grant him eternal life. 

He poured this liquid into a chalice that he had carved from the wood of a magical tree the location of which is known only to Lucius himself he then enchanted the cup with various spells. 

He named it the Calice della morte, as he believed that it would allow him to conquer death itself.

I printed mine in Fillamentum Timberfill Light Wood on my Prusa Mk3 with a 0.8mm nozzle with 0.5mm infill and zero support, 

I then gave it a sanding up with 180 grit before weathering with some coffee alcohol ink diluted with isopropyl, i then gave it a second sanding with 240 grit to re lighten the highpoints.

though if you wanted to print in plastic i would try dry brushing the model for a similar effect

I hope you enjoy, and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping.

https://www.buymeacoffee.com/bugman140

Canadian Plague Doctor Goose

Plague Doctor Goose_Standing.stl

Axe prop - Print in place!

axe.stl

Awooga Glasses || HalloweenWearable

Awooga Glasses V1.0.3mf

Ghost Pop Beads

These “Ghost Pop Beads” snap together to form spooky chains or rings as long as you want! Use for decoration or to accessorize your costume.

See here for video: https://youtu.be/sqHG2kSpsd8 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the bottom end of one piece to open it up. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

This design is entered in the 2023 HalloweenWearable Contest

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 
Skull Pop Beads: https://than.gs/m/943349 


The Crowstess

This is the the hostess to my current project.  She will great you and seat you while you wait.

She's available to take other jobs as needed.


The Mysterious Artefact Baldur's gate 3

The Full Artefact Low Poly.stl

Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


1.5GB Tangle of 260 Spiderwebs (Loose Strand Density)

Spiderweb-Dia254-Sect24-Span12.stl

1.5GB Tangle of 260 Spiderwebs (Tight Strand Density)

Spiderweb-Dia250-Sect24-Span8.stl

1.5GB Tangle of 260 Spiderwebs (Normal Strand Density)

Spiderweb-Dia250-Sect24-Span10.stl

Three Dual Colour Pumpkins (Pumpkin 3)

Dual Colour Pumpkin 3 - Body.stl

Spooky Funk Key

You can now own a piece of cinematic history, with this authentic Funk Key from the underrated masterpiece known as [Cool Guy 2.5](https://www.youtube.com/watch?v=ikM106oNWKU). Also just a good spooky prop for Halloween :P

---

For the perfect replica, use Fillamentum's ['Gold Happens' Extrafill PLA](https://bit.ly/FL-gold)([Also on MatterHackers](https://bit.ly/MH-gold))

prop,

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Calice Della Morte

Canadian Plague Doctor Goose

Axe prop - Print in place!

Awooga Glasses || HalloweenWearable

Ghost Pop Beads

The Crowstess

The Mysterious Artefact Baldur's gate 3

Skull Pop Beads

1.5GB Tangle of 260 Spiderwebs (Loose Strand Density)

1.5GB Tangle of 260 Spiderwebs (Tight Strand Density)

1.5GB Tangle of 260 Spiderwebs (Normal Strand Density)

Three Dual Colour Pumpkins (Pumpkin 3)

View 17 new models

Amelia Watson Time Travel Clock

Cracked Tombstones (Leaning Left)

Cup of Teeth - Teacup

Pumpkin Potion Bottle

View 10 new models

Cypher Trapwire

Mihawk's Sword