DaveMakesStuff

1.5GB Tangle of 260 Spiderwebs (Loose Strand Density)

by
DaveMakesStuff
Follow
Follow
Remix Model
DaveMakesStuff
DaveMakesStuff
|
Image 1 of 2
1.5GB Tangle of 260 Spiderwebs (Loose Strand Density) 3d model
DaveMakesStuff
DaveMakesStuff
|
Image 1 of 2
1.5GB Tangle of 260 Spiderwebs (Loose Strand Density) 3d model
2D
3D
Makes
1.5GB Tangle of 260 Spiderwebs (Loose Strand Density) 3d model
1.5GB Tangle of 260 Spiderwebs (Loose Strand Density) 3d model
This model is restricted by licensing terms. 

These spiderwebs are part of a massive 1.5GB tangle of 260 unique and ready-to-print spiderwebs! You are sure to find the spiderweb you are looking for.

See here for video: https://youtu.be/1DdbW5yZIL4

Strands are 2mm in diameter with a mesh density that can be scaled up if thicker strands are needed. Designs vary according to overall web diameter, number of sections and density of the strands.

Downloads are grouped according to strand density: Normal Strands: https://than.gs/m/943155 Tight Strands: https://than.gs/m/943156 Loose Strands: https://than.gs/m/943157

The file name indicates the different parameters of each web:

“Dia” indicates the diameter in mm of the spiral webbed portion of each model. The radial strands extend radially another 10mm, so the full “footprint” of each file is the “Dia” values plus 20mm.

“Sect” indicates the number of sections, this equates to the number of radial support strands.

“Span” indicates the distance in mm between each spiral strand. 10mm is “normal,” 8mm is “tight” and 12mm is “loose.”


189 Likes297 DownloadsOctober 6, 2023



189 Likes297 DownloadsOctober 6, 2023
This model is restricted by licensing terms.