Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Medium Tolerance Snappy Cat:**
Coming Soon
**Loose Tolerance Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Grid puppy

Imagine having a puppy that never barks but is just as adorable! 🐾 Our 3D grid wire puppy is so cute you'll want to say 'Sit!' right away! 🐶 With its complex 3D grid design, it's more than just a sculpture. By the way, in our store there are also other animals and zodiac signs!

Tip: This adorable puppy would be ideal to place in a child's room or next to your favorite books on a shelf! 🐶📚

Hermit Crab Hideaway.stl

A place for hermit crabs to hide and to climb. Let them live their best lives. 

low poly shiba inu keychain.stl

Tell Your Dog I Said WhosAGoodBoy Keychain

Tell Your Dog I Said WhosAGoodBoy Keyring.stl

Akita Dog

🐾🏠 Bow-wow, dog lovers and loyal companions! 🌟🐕 Get ready to unleash the charm with our "Akita" wire figure! 🖨️🎨 This digital template lets you 3D print a majestic Akita, adding a touch of paw-some elegance to your home decor. 🏡🌸 The intricate lattice design captures every fluffy fur and noble expression, creating a masterpiece that'll make your guests go "woof-tastic!" 🤩🐶 And guess what? Our store is a playground of wire figures, so you can create your own decor doggy paradise! 🌳🐾 Perfect for dog lovers, pet parents, and anyone who wants to showcase their puppy love in style. 🌈🐩 So fetch your 3D printer, let the tail wagging begin, and welcome the Akita to your heart and home! 🎾🐕

Pomeranian Wire Art Dog

Our Pomeranian is the Napoleon of the animal kingdom: small, but with a charisma that fills entire rooms! 🐶👑 In ornate 3D lattice design, this little king brings a touch of majesty to your home. Perfect for the display case, the desk or next to the food bowl of your real four-legged friend. Psst, other animals and zodiac signs are of course also available! 🌟🛒

TIP: The "little king" looks especially good when surrounded by his "court". Place the sculpture between your favorite books or next to a photo of your real pet to give the 3D lattice design the perfect setting. 📚

Cat Sitting in Pumpkin ams

Pumpkin Style! We told you not to let the cat play with the pumpkin! designed for the ams

Tell Your Dog I Said Who'sAGoodBoy Charm

Tell Your Dog I Said WhosAGoodBoy Charm.stl

Pets Ornament

pets ornament in mode vase, no need supports

AirTag Dog Collar Holder

AirTag - AirTag Holder-7.step

cute cat pen holder

Guess what? It’s #BackToSchool time, and I’ve got another model for you! a pen holder that’s so cool, you can even pretend it’s a planter if you scale it up a bit! I printed mine at 80%

this model can only be printed in a single color, for those who prefer multicolor printing, there's a multipart version available on my Patreon page at:  https://www.patreon.com/pressprint

and if you are a bambulab user you can find the pre-painted 3mf files [here](https://thangs.com/designer/pressprint/3d-model/cute%20cat%20pen%20holder%203mf-926280?manualModelView=true&source=mymodels)


cute cat pen holder 3mf

pre painted 3mf files for our beloved bambulab users.

cute cat vase 3mf

Cute Blob Cats - Holoprops

Blob_Cat-Body_1LegUp_Holoprops.stl

Dog Kit Card

Dog Kit Card_V1.stl

mothercat.stl

cat.stl

Cat 😺🎨 

😺🎨 Purr-fect news, feline friends and kitty enthusiasts! 🐾🏠 Unleash the meow-gic of our "Cat" wire figure! 🐱✨ This digital template allows you to 3D print a charming cat, adding a sprinkle of whiskered wonder to your home decor. 🖨️🏡 The intricate lattice design captures every cute detail, creating a masterpiece that'll make your guests go "pawsitively" amazed! 🤩🐾 And hey, our store is a treasure trove of wire figures, so you can create your own purr-sonalized decor kingdom! 🐈🌟 Perfect for cat lovers, whimsical souls, and anyone who wants to add a touch of feline flair to their living spaces. 🌈😻 So grab your 3D printer and let the feline fun begin! 🎨🐾

pets

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

Grid puppy

Hermit Crab Hideaway.stl

View 26 new models

View 87 new models

View 19 new models

Pomeranian Wire Art Dog

View 15 new models

View 137 new models

Pets Ornament

AirTag Dog Collar Holder

cute cat pen holder

cute cat pen holder 3mf

View 46 new models

Dog Kit Card

mothercat.stl

View 104 new models

Cat Deterrent Door Spikes