Bicycle cribbage board replacement peg

peg (1).stl

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Space Fishing Rod  // Peg Anything X Mount

x-spacerod-a.stl

Wacom Pen Holder // Peg Anything

The pegboard life is grand... everything you need, organized and within arms reach! This print holds your Wacom Intuos Pen Holder.

Made for standard pegboards with 1/4" holes spaced 1" apart

peg-wacompen-1.stl

Scotch Tape Holder // Peg Anything

A perfect fit for those little plastic scotch tape dispensers. Don't let it clutter up your desk, throw it on a pegboard!

This one does require supports!

HTC Vive Controller + Headset Holders // Peg Anything

peg-vivecontroller-beefy.stl

Pegboard Cupboard - BackToSchool

peg cupboard together.stl

Tough Little Hook // Peg Anything

I made stronger hooks that use two pegs to prevent rotation. At 100% infill these little suckers can hold a fair amount of weight!

Made for standard pegboard with 1/4" holes spaced 1" apart. Photographed model printed with [MatterHacker White PRO Series PLA](https://bit.ly/PRO-PLA)

Magnetic Tack // Peg Anything

peg-magnet-6x3mm.stl

Flush Cutter, Pliers, Clippers Holder // Peg Anything

If you own a 3D printer, you probably have a pair of these blue clippers lying around. Instead of searching around for them all the time, how about hanging them up on a pegboard so you'll always know where they are!

Super quick print. No supports required. Print solid.

Peg Anything // Removable Containers

container-5x3x1-5.stl

Clothespin

clothespin-v1.stl

Pegstr - Glue Bin

Customized version of https://www.thingiverse.com/thing:537516

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=537516
Instructions

Using the following options:

holder_x_size = 150
holder_y_size = 70
holder_height = 45
wall_thickness = 2.4
holder_x_count = 1
holder_y_count = 1
corner_radius = 5
taper_ratio = 1.0
holder_offset = 0.0
strength_factor = 1
closed_bottom = 1
holder_cutout_side = 0.0
holder_angle = 0.0


peg

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bicycle cribbage board replacement peg

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

View 17 new models

View 16 new models

View 78 new models

View 18 new models

View 21 new models

View 10 new models

View 20 new models

View 66 new models

View 111 new models

View 72 new models

Clothespin

Pegstr - Glue Bin